12
2
Î
{
x
È
1
Ç
English
Español
Français
Press ENTER
Pulse ENTER
Appuyer sur ENTER
Select Language
Seleccione el idioma
Sélection de Langue
Quick Start setting
The unit can be turned on faster, in about
1 second. Please note that Quick Start
mode slightly increases power
consumption when the unit is off.
(See Operation Instructions for details)
Turn Quick Start on ?
On
Off
Aspect Ratio Selection
Select TV type and press ENTER.
(Please refer to Operation Instruction
for details)
4:3 TV
16:9 Widescreen TV
16:9
4:3
Default Recording Source
Please select the source from which this
unit will record each time it is turned
on. Note: Selecting "Internal TV Tuner"
will start the Auto Channel Clock
Settings process.
This one time process takes a few minutes.
Internal TV Tuner
Input
R6/LR6, AA
SRD MUSIC
SFC/EQ
Plug-in Auto Tuning
RETURN
ADD/DLT
CH
,
,
,
ENTER
Numbered
buttons
POWER
/I
CH
Regarding DST (Daylight Saving Time) (
page 15)
Legal revision is expected to change the DST period in 2007.
When you use the unit with DST on, the change may cause the
unit’s clock to go behind the actual time. Check the DST setting in
“Set Clock Manually” in the Setup menu, set DST off and reset the
clock precisely if you are using this function.
Preparation
Turn on the television and select the
appropriate video input to suit the
connections to this unit.
About “Quick Start” function
If you set Quick Start to on, you can start recording to DVD-
RAM about 1 second after you press [
] to turn the unit on
and then sequentially press [
REC].
The following happens when you have selected “On”.
Power consumption in standby mode increases because
power is supplied to the unit.
Press [
].
If you make a mistake, press [RETURN] to return to an earlier screen.
If you activate “Quick Start” function, select “On”.
Press [
,
] to select the language and
press [ENTER].
Press [
,
] to select the aspect ratio that
fi ts your television best (“4:3 TV” or “16:9
Widescreen TV”), and then press [ENTER].
Press [
,
] to select “On” or “Off” and
press [ENTER].
Press [
,
] to select “Internal TV
Tuner” or “Input” and press [ENTER].
When you do not set channels on this unit, select “Input”. The
unit then displays “Set Clock Manually” screen. Set the clock
manually (
page 15).
(Continued on next page)
Insert the included batteries into the remote
control.
Insert so the poles (
and
) match those in the remote control.
Press [THEATER] to switch the remote
control to operate this unit.
TV operation
buttons
TV
THEATER
CANCEL
DRIVE SELECT
SETUP
REC
After pressing [
] to turn the unit on for the fi rst time, the unit
starts necessary setup.
If the setup screen does not appear, press [DRIVE SELECT],
and turn the power off and on again.
Remote control signal sensor
Included parts to be used
Remote control
2 Batteries
RQT8656-P.indd 12
RQT8656-P.indd 12
2006/02/28 16:52:12
2006/02/28 16:52:12