24
VQT2W23
STEP 7:
Reprogramming the
remote control
When other Panasonic products respond to this
remote control
Change “Remote Control” (
>
42) on the main unit and the
remote control (the two must match) if you place other
Panasonic products close together and it responds to this
remote control.
To change the code on the main unit.
1
While stopped, press [START].
2
Press [
3
,
4
] to select “To Others” and
press [OK].
3
Press [
3
,
4
] to select “Setup” and press
[OK].
4
Press [
3
,
4
] to select “General” and press
[OK].
5
Press [
3
,
4
] to select “Remote Control”
and press [OK].
6
Press [
3
,
4
] to select the code (1 or 2) and
press [OK].
To change the code on the remote control.
1
While pressing [OK]
Press and hold the numbered button (1 or
2), which has the same number you
selected in the step 6 for more than 5
seconds.
2
Press [OK].
Inserting or removing
media
≥
When inserting a media item, ensure that it is facing the right
way up.
≥
While the reading indicator is displayed, do not turn off the
unit or remove the media. Such action may result in loss of
the media’s contents.
≥
When removing the SD card, press on the centre of the card
and pull it straight out.
∫
To switch sources
Press [BD/SD] or [EXT-IN] to select “BD/DVD”, “SD” or
“USB”.
≥
If media is inserted while the unit is stopped, the source
switches automatically depending on the inserted media.
SD CARD
SETUP MIC
SCBTT755_350EBGN_VQT2W23.book 24 ページ ２０１０年６月１８日 金曜日 午後４時５８分
