DISC OPERA
TIONS
ENGLISH
26
RQT8043
RQTX0059
QUICK SETUP enables successive settings of the items in the shaded area.
Player settings (continued)
7
“Video” tab
TV Aspect
Choose the setting to suit your
television and preference.
• 4:3 Pan&Scan : Regular aspect television (4:3)
The sides of the widescreen picture are cut off so it fi lls the
screen (unless prohibited by the disc).
• 4:3 Letterbox: Regular aspect television (4:3)
Widescreen picture is shown in the letterbox style.
• 16:9: Widescreen television (16:9)
TV Type
Select to suit the type of
television.
• Standard (Direct View TV) • CRT Projector
• LCD TV/Projector
• Projection TV
• Plasma TV
Time Delay
When connected with a Plasma
display, adjust if you notice the
audio is out of sync with the
video.
• 0ms
• 20ms
• 40ms
• 60ms
• 80ms
• 100ms
Video Out (AV/Component)
Choose the video signal format
to be output from the SCART
(AV) and Component terminal.
• Video/YPbPr
• S-Video/YPbPr
• RGB/No Output
Still Mode
Specify the type of picture
shown when paused.
• Automatic
*
5
• Field: The picture is not blurred, but picture quality is lower.
*
5
• Frame: Overall quality is high, but the picture may appear blurred.
NTSC Disc Output
Choose PAL 60 or NTSC output
when playing NTSC discs
(
\
page 14, Video systems).
• PAL60 : When connected to a PAL television.
• NTSC: When connected to an NTSC television.
7
“Audio” tab
Dolby Digital
*
6
• Bitstream
• PCM
Select to suit the type of equipment you connected to the
HDMI AV OUT terminal (
\
page 11).
Select “Bitstream” when the equipment can decode the
bitstream (digital form of multi-channel data). Otherwise,
select “PCM”.
(If the bitstream is output to the equipment without a
decoder, high levels of noise can be output and may
damage your speakers and hearing.)
DTS Digital Surround
*
6
• Bitstream
• PCM
MPEG
*
6
• PCM
• Bitstream
Dynamic Range
Compression
• Off
• On: Adjust for clarity even when the volume is low by compressing
the range of the lowest sound level and the highest sound level.
Convenient for late night viewing.
(Only works with Dolby Digital)
Speaker Settings
(
\
page
2
8
)
Set the delay time for your
center and surround speakers
• Center:
0.0 /1.0/2.0/3.0/4.0/5.0 ms
• Surround (L/R): 0.0 /5.0/10.0/15.0 ms
*
5
Refer to “Frame still and fi eld still” (
\
page 45, Glossary).
*
6
When audio is output from HDMI AV OUT terminal, and the connected equipment does not support the
item selected, the actual output will depend on the performance of this connected equipment.
Changing the player settings (continued)
RQTX0059-B_Out_new6.indd 26
RQTX0059-B_Out_new6.indd 26
3/5/07 3:27:09 PM
3/5/07 3:27:09 PM
