RQTX0072
7
Step 1:
P
ositioning the speaker
s
Simple setup
1
Attach the base stands to the front speakers.
2
Place the surround speakers on the front
speakers.
3
Fasten the metal bracket with the screws at the
right, left and back of the speakers.
■
Positioning the speakers for Bi-Amp TS mode
30
o
30
o
(SB-PF9)
(SB-PF9)
(SB-WNC9)
(SB-PC9)
(SB-PS9)
(SB-PS9)
Center speaker
Surround
speaker (right)
on top of front
speaker (right)
Surround speaker
(left) on top of
front speaker (left)
Subwoofer
Front speaker
Surround
speaker
Front
speaker
Short screws
Tighten
securely
■
Assemblying the speakers for Bi-Amp TS mode
To enjoy better sound quality in Bi-Amp TS mode (
➡
page 34, Refining the sound quality: Fi Mode), stack the
surround speakers on the front speakers.
Speaker installation options
Long screws
Tighten
securely
SC-NC9
■
Attaching to a wall
You can attach the center
speakers to a wall.
1
Drive a screw (not
included) into the wall.
2
Fit the hole securely
onto the screw(s).
The wall or pillar on which
the speaker is to be attached
should be capable of
supporting 10 k
g
per screw.
Consult a qualified building
contractor when attaching the
speaker to a wall. Improper
attachment may result in
damage to the wall and
speaker.
30 - 35 mm
5 - 7 mm
3.0 - 4.0 mm
7.5 - 9.4 mm
220 mm
Face the
protruding
portion of
the metal
bracket to the
speakers.
Base stand
6 Metal
brackets
2 Base stands
Supplied
accessories
1 Allen key
12 Short
screws
4 Long
screws
6 Side lock
cover
4
Push and click the side lock cover to the
fastened metal bracket.
Metal bracket
Side lock cover
If you play 5.1 channel sources in this stack up assembly,
use Bi-Amp TS mode to enjoy better sound effect.
Note
NC9_NC6 EB Draft.indb 7
2/26/2007 1:44:42 PM