Getting started
13
VQT4E88
To prevent the speakers from falling, it is recommended, as an additional
protection measure, to attach the speakers to the wall with a fall prevention
cord (hereafter “cord”).
≥
Consultation with a qualified housing contractor concerning the appropriate procedure when attaching to a concrete wall or a
surface that may not have strong enough support is recommended (
>
12). Improper attachment may result in damage to the
wall and speakers, and personal injury.
≥
Use a cord of less then
‰
1.5 mm, which is capable of supporting over 10 k
g.
≥
Keep the screws out of reach of children to prevent swallowing.
≥
Make sure that the slack of the cord is minimal.
≥
Connect only after all other connections are complete.
≥
The active subwoofer consumes a small amount of AC power, even when it is in standby mode (Approx. 0.12 W). In the
interest of power conservation, if you will not be using this system for a long time, unplug it from the household mains socket.
Speaker fall prevention measures
A
Cord (not supplied)
B
Screw eye (not supplied)
C
Wall
D
TV
AC mains lead connection
A
To a household mains socket
Saving energy
This system is designed to conserve its power consumption and save energy.
≥
This system will automatically switch to standby mode when no signal is input and no operation is performed for approx.
2 hours.
A
C
C
D
A
B
Wall-mounted speakers
Active subwoofer
SC-HTE50EB_VQT4E88.book 13 ページ ２０１２年２月２４日 金曜日 午後７時５４分
