12
VQT4E88
Drive a screw (not supplied) into the wall.
≥
Use the measurements indicated below to identify the screwing positions on the wall.
≥
Leave at least 20 mm of space above and 10 mm of space each side of the speaker to allow enough space for fitting the
speaker.
≥
The position in the wall where the screw is to be attached as well as the screw should be capable of supporting over 10 k
g
.
≥
Keep the screws out of reach of children to prevent swallowing.
Fit the speaker(s) securely onto the screw(s) with the hole(s).
≥
Place the speaker that is connected with the speaker cable with a red connector on the observers’ right, and connect with the
speaker cable with a white connector on the observers’ left.
Speaker installation option
Attaching to a wall
A
At least 30 mm
B
‰
4.0 mm
C
‰
7.0 mm to
‰
9.4 mm
D
Wall or pillar
E
5.5 mm to 6.5 mm
F
24 mm
G
40 mm
DO
DO NOT
≥
Move the speaker so
that the screw is in
this position.
≥
In this position, the
speaker will likely fall
if moved to the left or
right.
SC-HTE50EB_VQT4E88.book 12 ページ ２０１２年２月２４日 金曜日 午後７時５４分
