background image

8

VQT4E88

Getting started

Information for your safety

Do not hold the speakers in one hand to avoid injury by dropping the speakers when carrying.

When carrying the active subwoofer

 

Place the active subwoofer in a horizontal position with the top panel faced upward.

Placing the active subwoofer and the speakers too close to the walls, and corners can result in excessive bass. Cover walls 
and windows with thick curtains.

If irregular colouring occurs on your TV, turn the TV off for about 30 minutes. If it persists, move the speakers further away 
from the TV.

Keep magnetised items away. Magnetised cards, watches etc., can be damaged if placed too close to the system.

Caution

The active subwoofer and supplied speakers are to be used only as indicated in these instructions. Failure to do so may 
lead to damage to the amplifier and/or the speakers, and may result in the risk of fire. Consult a qualified service person if 
damage has occurred or if you experience a sudden change in performance.

Do not attempt to attach these speakers to a wall using methods other than those described in this manual.

Speaker system

When attaching the speakers to a wall (

>

12)

The wall or pillar on which the speakers are to be attached should be capable of supporting 10 k

g

 per screw. Consultation with 

a qualified building contractor is recommended when attaching the speakers to a wall. Improper attachment may result in 
damage to the wall and speakers, and personal injury.

Active subwoofer

The remote control signal sensor is located on the active subwoofer.

Use the remote control within the correct operation range.

B

Do not hold the active subwoofer from this 
opening.

The parts inside (speaker unit) may be damaged.

C

Always hold the bottom of the active subwoofer when 
moving it.

A

A

Remote control signal sensor

Remote control operation range

Distance: Within approx. 7 m directly in 

front

Angle: Approx. 30

o

left and right

B

C

HTE50EB~Body_mst.fm  8 ページ  2012年3月1日 木曜日 午後2時31分

Содержание SC-HTE50

























Отзывы: