background image

RQT9777

3

Precautions

Unit

Do not place sources of naked flames, such as lighted 
candles, on this unit.

Placement

To reduce the risk of fire, electric shock or product 
damage,

j

Do not install or place this unit in a bookcase, built-in 
cabinet or in another confined space. Ensure this unit 
is well ventilated.

j

Do not obstruct this unit’s ventilation openings with 
newspapers, tablecloths, curtains, and similar items.

Button-type battery (Lithium battery)

Danger of explosion if battery is incorrectly replaced. 
Replace only with the type recommended by the 
manufacturer.

Keep out of reach of children.

Insert with poles aligned.

Mishandling of batteries can cause electrolyte leakage 
and may cause a fire.

j

Remove the battery if you do not intend to use the 
remote control for a long period of time. Store in a 
cool, dark place.

j

Do not heat or expose to flame.

j

Do not leave the battery(ies) in a car exposed to 
direct sunlight for a long period of time with doors and 
windows closed.

j

Do not touch the terminals (

i

 and 

j

) with metal 

objects.

j

Do not recharge, disassemble, remodel, heat or 
throw into fire.

When disposing the batteries, please contact your local 
authorities or dealer and ask for the correct method of 
disposal.

CAUTION

The lightning flash with arrowhead 
symbol, within an equilateral triangle, 
is intended to alert the user to the 
presence of uninsulated “dangerous 
voltage” within the product’s 
enclosure that may be of sufficient 
magnitude to constitute a risk of 
electric shock to persons.

The exclamation point within an 
equilateral triangle is intended to alert 
the user to the presence of important 
operating and maintenance 
(servicing) instructions in the literature 
accompanying the appliance.

CAUTION: TO REDUCE THE RISK OF ELECTRIC 

SHOCK, DO NOT REMOVE SCREWS.
NO USER-SERVICEABLE PARTS 
INSIDE.
REFER SERVICING TO QUALIFIED 
SERVICE PERSONNEL.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

THE FOLLOWING APPLIES ONLY IN THE 
U.S.A.
FCC Note:

This equipment has been tested and found to comply with 
the limits for a Class B digital device, pursuant to Part 15 
of the FCC Rules.
These limits are designed to provide reasonable 
protection against harmful interference in a residential 
installation. This equipment generates, uses and can 
radiate radio frequency energy and, if not installed and 
used in accordance with the instructions, may cause 
harmful interference to radio communications.
However, there is no guarantee that interference will not 
occur in a particular installation. If this equipment does 
cause harmful interference to radio or television reception, 
which can be determined by turning the equipment off and 
on, the user is encouraged to try to correct the 
interference by one or more of the following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and 
receiver.

Connect the equipment into an outlet on a circuit 
different from that to which the receiver is connected.

Consult the dealer or an experienced radio/TV 
technician for help.

Any unauthorized changes or modifications to this 
equipment would void the user’s authority to operate this 
device.
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, 
including interference that may cause undesired 
operation.
Responsible Party:
Panasonic Corporation of North America
One Panasonic Way,
Secaucus, NJ 07094
Support Contact:
Panasonic Consumer Marketing Company of 
North America
Telephone No.: 1-800-211-PANA (7262)

THE FOLLOWING APPLIES ONLY IN 
CANADA.

This device complies with RSS-GEN, RSS-210 of the IC 
Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference,
(2) This device must accept any interference received, 
including interference that may cause undesired operation 
of the device.

THE FOLLOWING APPLIES IN THE U.S.A. 
AND CANADA

This transmitter must not be co-located or operated in 
conjunction with any other antenna or transmitter.
This equipment complies with FCC/IC radiation exposure 
limits set forth for an uncontrolled environment and meets 
the FCC radio frequency (RF) Exposure Guidelines in 
Supplement C to OET65 and RSS-102 of the IC radio 
frequency (RF) Exposure rules. This equipment has very 
low levels of RF energy that is deemed to comply without 
maximum permissive exposure evaluation (MPE). But it is 
desirable that it should be installed and operated keeping 
the radiator at least 20 cm (7

7

/

8

q

)

 

or more away from 

person’s body (excluding extremities: hands, wrists, feet 
and ankles).

SC-HTB370PPC_RQT9777-1P_mst.book  Page 3  Tuesday, January 29, 2013  11:48 AM

Содержание SC-HTB370





































Отзывы: