20
RQT9777
To prevent the speakers from falling, it is recommended, as an additional
protection measure, to attach the speakers to the wall or table with a fall
prevention cord (hereafter “cord”).
≥
Consultation with a qualified installation specialist concerning the appropriate procedure when attaching to a concrete wall or a
surface that may not have strong enough support is recommended (
>
12, 15). Improper attachment may result in damage to
the wall and speakers, and personal injury.
≥
Use a cord that is capable of supporting over 10 k
g
(22.05 lbs) (with a diameter of about 1.5 mm (
1
/
16
q
)).
≥
The speaker fall prevention measure is to minimize the possibility of damage and harm, but it does not completely guarantee
this effect.
≥
Keep the screws out of reach of children to prevent swallowing.
≥
Make sure that the slack of the cord is minimal.
Additional speaker fall prevention measures
When attaching the speakers to a wall
A
Cord
§
B
Screw eye
C
Wall
D
Wall-mounted
speakers
§
If the cord cannot be threaded through the holes, try bending the cord in 2 locations,
about 10 mm (
13
/
32
q
) apart from the tip, at an angle of 45
o
(as
illustrated above).
Horizontal placement
Vertical placement
SC-HTB370PPC_RQT9777-1P_mst.book Page 20 Tuesday, January 29, 2013 11:48 AM
