Operations
RQT9777
27
Advanced operations
To display the current audio format.
Press and hold [SOUND] for more than
4 sec.
≥
The current audio format is indicated for 5 sec.
Audio format is not indicated when
“ ”
or “AUX” is selected
as the source.
Change the dual audio from main to secondary.
≥
This setting will only work if the audio output setting on
the connected TV or player, etc. is set to "Bitstream"
and dual audio is available in the audio source.
Press and hold [MUTE] for more than
4 sec.
While the setting is displayed, press
[MUTE] to change the setting.
≥
The setting changes each time [MUTE] is pressed.
≥
The indicator for the selected setting blinks for 20 sec and
then exits the setting mode.
≥
The setting is maintained until it is changed again.
With this function, you can prevent sudden loud sounds.
The output will be reduced automatically when the input
exceeds a certain level.
Press and hold [INPUT SELECTOR]
on the remote control for more than
4 sec.
While the setting is displayed, press
[INPUT SELECTOR] on the remote
control to change the setting.
≥
The setting changes each time [INPUT SELECTOR] is
pressed.
≥
The indicator for the selected setting blinks for 20 sec and
then exits the setting mode.
≥
The setting is maintained until it is changed again.
You can select different modes to suit the type of
connections with emphasis on connectivity or high quality
audio.
≥
Make sure that a Bluetooth
®
device is already paired
with this system. (
>
24)
Press [ ] to select “ ”.
≥
“ ”
indicator will blink slowly. If the indicator lights, a
Bluetooth
®
device is already connected with this system.
Disconnect it. (
>
24)
Press [ ] to display the current
mode.
While the mode is displayed, press
[ ] to select the mode.
≥
The setting changes each time [
] is pressed.
≥
The indicator for the selected setting blinks for 10 sec and
then exits the setting mode.
≥
The setting is maintained until it is changed again.
Audio format indicator
“STADIUM” indicator blinks:
Dolby Digital
is the audio format.
“MUSIC” indicator blinks:
DTS
is the audio format.
“CINEMA” indicator blinks:
PCM
is the audio format.
Changing the dual audio
“STANDARD” indicator blinks (
A
):
Main
(Factory preset)
“STEREO” indicator blinks (
B
):
Secondary
(SAP: Secondary Audio Program)
When
A
and
B
both blink: Main and secondary
Auto gain control
“STANDARD” indicator blinks:
Auto gain control is on.
“STEREO” indicator blinks:
Auto gain control is off.
(Factory preset)
Bluetooth
®
communication
mode
“STANDARD” indicator blinks:
MODE1
(Factory preset)
Emphasis on connectivity
“STEREO” indicator blinks:
MODE2
Emphasis on audio quality
SC-HTB370PPC_RQT9777-1P_mst.book Page 27 Tuesday, January 29, 2013 11:48 AM
