Panasonic SC-HTB370 Скачать руководство пользователя

Страница: 24 / 36

RQT9777

Preparation

≥

Turn on the main unit.

Press [

BÍ C

I].

Active subwoofer on/off button [

Use this button to turn the active subwoofer on and
off.

The active subwoofer is on.

The active subwoofer is off.

The active subwoofer will still consume a small
amount of power even when it is turned off (

Check that the wireless link is

activated.

WIRELESS LINK indicator
Lights red:

The wireless link is not activated.

Lights green:

The wireless link is activated.

Blinks green:

The active subwoofer is trying to activate the
wireless link with the main unit.

The wireless link will be activated when the main unit and the
active subwoofer are both turned on.

By using the Bluetooth

connection, you can listen

to the sound from the Bluetooth

audio device

from this system wirelessly.

Preparation

≥

Turn on the Bluetooth

feature of the device and

place the device near the main unit.

Press [ ] to select “ ”.

≥

If the “

” indicator flashes quickly, go to step 3.

Press and hold [ ] until the “ ”

indicator flashes quickly.

≥

If the “

” indicator flashes slowly, repeat step 2.

Select “SC-HTB370” from the

Bluetooth

device’s Bluetooth

menu.

≥

If prompted for the passkey on the Bluetooth

device, enter

“0000”.

≥

Once the Bluetooth

device is connected, the “

” indicator

stops flashing and lights up.

Press [ ] to select “ ”.

≥

If the “

” indicator lights, a Bluetooth

device is already

connected with this system. Disconnect it. (

below)

Select “SC-HTB370” from the

Bluetooth

device’s Bluetooth

menu.

∫

Disconnecting a Bluetooth

device

Press and hold [ ] until the “ ” indicator flashes
slowly.

≥

When “

” is selected as the source, this system will

automatically try and connect to the last connected
Bluetooth

device.

≥

The Bluetooth

device will be disconnected if a different

audio source (e.g. “TV“) is selected.

≥

Refer to the operating instructions of the Bluetooth

device

for further instruction on how to connect a Bluetooth

device.

≥

This system can only be connected to one device at a time.

≥

You can register up to 8 devices with this system. If a 9th
device is paired, the device that has not been used for the
longest time will be replaced.

≥

To change the sound quality, refer to “Bluetooth

communication mode” on page 27.

Active subwoofer wireless

connection

Bluetooth

connection

Bluetooth

pairing

Connecting a Bluetooth

device

SC-HTB370PPC_RQT9777-1P_mst.book Page 24 Tuesday, January 29, 2013 11:48 AM

Содержание SC-HTB370





































Результаты поиска

Содержание SC-HTB370

Отзывы:

Похожие инструкции для SC-HTB370

Бренды по названию

Популярные бренды

Panasonic SC-HTB370, Руководство пользователя

Результаты поиска

Содержание SC-HTB370

Отзывы:

Похожие инструкции для SC-HTB370

Бренды по названию

Популярные бренды