Panasonic SC-HC58DB, Руководство по эксплуатации

Страница: 16 / 32

16
RQT9756
≥ If broadcasting stations are memorised, proceed to
“To re-scan DAB/DAB+ stations” to memorise stations on
other frequency blocks. (
l 14)
≥
If “SCAN FAILED” is still displayed, repeat steps 1 to 3 until a
station is memorised. If the situation does not improve, try
using an outdoor DAB antenna or consult your dealer.
∫
Checking the DAB/DAB+ signal
reception quality
1
While listening to the DAB broadcast:
Press [PLAY MENU] repeatedly to select “SIGNAL
QUALITY” and then press [OK].
≥ The current frequency block is displayed and
then the reception quality is indicated.
2
If the signal reception quality is poor, move the
antenna to a position where the reception quality
improves.
3
To continue checking the quality of other frequency
blocks:
Press [
3
,
4
] again and select the desired
frequency.
4
Press [OK] to exit.
≥ If the antenna has been adjusted, perform auto scanning and
update the station memory. (
l 14)
Only the frequencies currently used in your region as
of January 2013 on BAND
III are Auto scanned
(“LOCAL”, factory setting).
Select “ALL BAND III ” when you want to store stations
on other frequencies to memory.
1
Press [PLAY MENU] repeatedly to select
“SCANMODE”.
2
Press [ 3 , 4 ] to select “ALL BAND III ” or “LOCAL”
and then press [OK].
≥
The “DAB AUTO SCAN” begins automatically.
≥
The DAB preset channels are erased when the
“SCANMODE” is changed.
≥ If the play timer has been set and DAB/DAB+ is the music
source, the timer switches off. (
l 18)
Preparation
≥
Turn the unit on.
≥ A station previously stored is overwritten when another
station is stored in the same channel preset.
1
Press [PLAY MENU] to select “A.PRESET”.
2
Press [ 3 , 4 ] to select “LOWEST” or “CURRENT”
and then press [OK].
LOWEST:
CURRENT:
To begin auto preset with the current frequency.*
* To change the frequency, refer to “Manual tuning and
presetting”.
The tuner starts to preset all the stations it can
receive into the channels in ascending order.
Preparation
1
Press [PLAY MENU] repeatedly to select
“TUNEMODE”.
2
Press [
3
,
4
] to select “PRESET” and then press
[OK].
Press [
:
/
6
] or [
5
/
9
] to select the channel.
Changing the Auto scan frequency
range
Reception quality
0 (poor) – 8 (excellent)
Listening to FM radio
You can preset up to 30 channels.
≥ Make sure that the antenna is connected. ( l 5)
≥
Press [RADIO] to select “FM”.
Presetting stations automatically
To begin auto preset with the lowest frequency
(FM 87.50).
Listening to a preset channel
SC-HC58DBEB_DBGN_GS~RQT9756-B.book 16 ページ ２０１３年１月２９日 火曜日 午前１０時１２分