Panasonic SC-HC402, Руководство по эксплуатации

Страница: 20 / 28

20
TQBJ0987
Attaching the unit to a wall
(optional)
This unit can be wall mounted using the supplied wall
mount brackets, safety holder, etc. Make sure that the
wall and the screws used for securing to the wall are
capable of supporting at least 36 k
g . The screws and
other items are not supplied as the type and size will
vary with each installation.
≥
Refer to step 6 and step 7 of “Wall mount
instructions” for details about the required screws.
≥ As an additional protective measure, attach the unit
to the wall with the fall prevention cord.
∫
Supplied accessories
≥
2 Wall mount brackets
≥
1 Safety holder
≥ 1 Wall mounting sheet
∫ Additionally required accessories
(commercially available)
≥ 4 Wall mount bracket fixing screws
≥
2 Safety holder fixing screws
≥
1 Fall prevention cord*
≥ 1 Screw eye
* Use a cord that is capable of supporting over 36 k g
(with a diameter of about 1.5 mm).
1
Unscrew the fixing screw at the rear of the unit.
2
Detach the stand from the unit while pressing the
catches upward.
≥ While lifting the catches upwards, gently pull the stand
forward.
3
Attach the fall prevention cord (not supplied) to this
unit.
A
Fall prevention cord (not supplied)
≥ Bend the cord twice from the tip, each at 45 o and 5 mm
apart for it to go through the holes.
B
5 mm
Installation accessories
≥
Keep the screws out of reach of children to prevent
swallowing.
≥ Keep the wall mount brackets out of reach of children
to prevent swallowing.
≥
Keep the screw eye out of reach of children to prevent
swallowing.
Safety precautions
Professional installation is required.
The installation should never be done by any
other than a qualified installation specialist.
PANASONIC DISCLAIMS ANY PROPERTY
DAMAGE AND/OR SERIOUS INJURY,
INCLUDING DEATH RESULTING FROM
IMPROPER INSTALLATION OR INCORRECT
HANDLING.
WARNING:
To prevent injury, this apparatus must be securely
attached to the wall in accordance with the
installation instructions.
Wall mount instructions
Before installation, turn the unit off and disconnect the
AC mains lead from the mains socket.
Keep the removed screw and stand for future use.
≥ When using the unit in a non-wall-mounted position again,
be sure to reattach the stand to the unit and secure it with
its screw.
Stand
Fixing screw
Soft blanket or cloth



SC-HC400_402-EGEBGN~TQBJ0987.book 20 ページ ２０１７年３月１６日 木曜日 午後７時５２分