g
AMPLIFIER SECTION
RMS OUTPUT POWER both channel driven
simultaneously
10 % total harmonic distortion (THD)
3 W per channel
2 W per channel
PMPO Output Power
90 W
60 W
Output impedance
HEADPHONE
16
Ω
to 32
Ω
MUSIC PORT
14 k
Ω
DC IN Jack
Terminal
14 V
Phone Jack
Terminal
3.5 mm stereo
Music Port Jack
Terminal
3.5 mm stereo
g
TUNER SECTION
Frequency range
FM
87.50 MHz to 108.00 MHz (50 kHz)
AM
522 kHz to 1629 kHz (9 kHz)
520 kHz to 1630 kHz (10 kHz)
g
CD SECTION
Disc played [8 cm or 12 cm]
(1) CD-Audio (CD-DA)
(2) CD-R/RW (CD-DA, MP3)
(3) MP3
Sampling frequency
CD
44.1 kHz
MP3
32 kHz, 44.1 kHz, 48 kHz
Bit rate
MP3
32 kbps to 384 kbps
Decoding
16/20/24 bit linear
Pick up
Wavelength
785 nm
Laser power
CLASS 1
(For Norge)
Bølgelengde
785 nm
Laserstyrke
Ingen farlig stråling sendes ut
(med sikkerhets-beskyttelse)
Audio Output (Disc)
Number of channels
2 channel
Frequency response
20 Hz to 20 kHz (+1, -2 dB)
Wow and flutter
Below measurement limit
Digital filter
8
D/A converter
MASH (1 bit DAC)
g
USB SECTION
Playable USB Storage Media
(1) HDD (with FAT 32 format and no partition)
(2) USB MP3 Player/Digital Audio Player
(3) USB Thumbdrives
Supported audio file format
MP3 Bit Rate
USB memory port
Maximum current
500 mA
Bit rate
MP3
32 kbps, 320 kbps
Audio Output (MP3)
Number of channels
2 channel
Frequency response (MP3)
20 Hz to 20 kHz
g
SPEAKER SECTION
Type
1 Way, 1 Speaker system
Speaker Unit(s)
Full Range Speaker
8 cm cone type
6
Ω
Impedance
6
Ω
Input power
6 W (MAX)
Dimensions (W x H x D)
121 mm x 236 mm x 146 mm
g
GENERAL
Power supply
AC 230 to 240 V, 50 Hz
AC 230 to 240 V, 50 Hz
AC 220 to 240 V, 50/60 Hz
Power consumption
32 W
16 W
Dimensions (W x H x D)
220 mm x 236 mm x 146 mm
Mass
With speakers
3.60 k
g
3.33 k
g
Without speakers
1.30 k
g
1.26 k
g
Operating temperature range
+5 °C to +35 °C
Operating humidity range
5 % to 90 % RH (no condensation)
Power consumption in standby mode:2.0 W (approx.)
Notes:
Specifications are subject to change without notice.
Mass and dimensions are approximate.
Specifications
6
7
Sleep timer
The SLEEP timer can turn the unit off after a set time.
Press [SLEEP] to turn the SLEEP function ON/OFF.
Each time you press the button:
30 MIN 60 MIN 90 MIN 120 MIN
OFF (Canceled)
g
To check the remaining time
Press
[SLEEP]
once
The play timer and sleep timer can be used together. The sleep timer always has
priority. Be sure not to overlap timer settings.
•
Sound quality
You can choose one of four types of sound quality.
Press [PRESET EQ] to select the sound quality.
Each time you press the button:
HEAVY CLEAR SOFT
(Adds punch to rock) (Clarifies higher sounds) (For background music)
EQ OFF (Canceled) VOCAL (Adds gloss to vocals)
•
Live Virtualizer
You can create a three-dimensional sound field when listening to stereo sound.
Press [SURROUND] to turn the Live Virtualizer ON/OFF.
The actual effect depends on the source played.
Play timer
You can set the timer to come on at a certain time to wake you up.
Preparation:
Turn the unit on and set the clock.
Prepare the music source you want to listen to; disc, radio, USB or music port
source, and set the volume.
Press [CLOCK/TIMER] repeatedly to select play timer.
CLOCK
z
PLAY
Original display
Within 5 seconds, press [
2
/
u
] or [
1
/
i
] to set the starting time.
Press [CLOCK/TIMER] to confirm.
Repeat steps 2 and 3 to set the finishing time.
To activate the timer
Press [
z
PLAY] to turn on the timer.
Press [
^
] to turn off the unit.
To
Action
Change the settings
Repeat steps 1 to 4 and 6.
Change the source of volume
Press [
z
PLAY]
to clear
z
PLAY indicator
from the display.
Make changes to the source or volume.
Perform steps 5 and 6.
Check the settings (when the
unit is on or in standby mode)
Press
[CLOCK/TIMER]
repeatedly to select
z
PLAY.
Cancel
Press
[
z
PLAY]
to clear the timer
indicator from the display.
The timer will start at the preset time, with the volume increasing gradually to the
preset level.
The timer comes on at the set time every day if the timer is on.
The unit must be in the standby mode for the timer to function.
If you turn the unit off and on again while the timer is functioning, the finish time
setting will not be activated.
When MUSIC PORT or USB is selected as the source when the timer comes
on, the system turns on and engages MUSIC PORT or USB as the source. If
you wish to playback from the portable audio equipment, activate the equipment
’s play mode and increase the volume. (See the portable audio equipment’s
instruction manual.)
•
•
•
•
•
Timers and others
EQ
➡
Page 2 for the position of remote control buttons.
Note
Note
Note
For continental Europe
For Southeast Asia
For Australia and N.Z.
Setting the time
This is a 24-hour clock.
Press [CLOCK/TIMER] to set the clock.
Press [
2
/
u
] or [
1
/
i
] to select the time within 5 seconds.
(Press and hold to change the time faster.)
Press [CLOCK/TIMER] again.
g
To display the clock when the unit is on
Press
[CLOCK/TIMER]
g
To check the time when the unit is off
Press
[CLOCK/TIMER]
The clock is accurate to within ±60 seconds a month. Readjust if necessary.
Set again after disconnecting the AC mains lead or power failure.
Note
SC-EN35
SC-EN33
SC-EN35
SC-EN33
SC-EN35
SC-EN33
SC-EN35
SC-EN33
For Southeast Asia
SC-EN35
SC-EN33
SC-EN35 E,GN,GCS PP.indd 6
22/03/2007 17:17:45
