8
RQT9252
STEP
3
Basic connections
Use the following connections when you want to output audio of your cable TV or VCR through this unit’s speakers.
≥
Turn off all equipment before connection and read the appropriate operating instructions.
You can enjoy 7.1ch surround sound by connecting an amplifier using audio cable via the SURROUND and SURROUND BACK terminals.
Connection to Set Top Box (Satellite receiver, Cable box, etc) or video cassette recorder
≥
This unit can decode the surround signal from the Set Top Box (Satellite receiver, Cable box, etc).
Press [
N
,
O
SELECT] several times to select “D-IN” (DIGITAL IN).
§
These audio connections will enable you to play audio from your TV through your home theater system (
>
19).
Connection to a TV with component video cable
≥
Connect terminals of the same colour.
≥
The video output resolution is restricted to “576p/480p” when
DVD-Video, DivX and BD-Video discs recorded at a rate of
50 frames per second is output from the COMPONENT
VIDEO OUT terminals.
§
These audio connections will enable you to play audio from
your TV through your home theater system (
>
19).
If you have a regular TV (CRT: cathode ray tube)
≥
Progressive output may cause some flickering, even if it is
progressive compatible. Turn off “Progressive” if you are
concerned about it. This is the same for multi system TV using
PAL mode (
>
33, “Progressive”).
To enjoy high definition/progressive video
≥
Connect to a TV that supports 576p/480p or higher.
≥
Set “Component Resolution” to “576p/480p”, “720p” or
“1080i”. (
>
36)
≥
Set “HDMI Video Mode” to “Off”. (
>
36) Otherwise, the video
is output as 576i/480i.
Connection to an amplifier via the SURROUND and SURROUND BACK terminals
OPTICAL
OUT
RF I
N
RF OUT
RF I
N
V
IDEO I
N
AUDIO I
N
L
R
V
IDEO OUT
AUDIO OUT
L
R
L
R
AUX
V
IDEO OUT
OPTICAL I
N
DIGITAL
TV
Video cable
(included)
Set Top Box (Satellite receiver,
Cable box, etc) or video cassette
recorder
(not included)
Main unit
Audio cable
§
(not included)
Optical digital audio cable
§
(not included)
RF cable
(not included)
RF cable
(not included)
To your cable TV
service or TV
antenna
NOTE
COMPO
N
E
N
T
V
IDEO OUT
Y
L
R
AUX
P
B
P
R
EXT
LOOP
OPTICAL I
N
DIGITAL
OPTICAL
OUT
L
R
AUDIO OUT
COMPO
N
E
N
T
V
IDEO I
N
Y
P
R
P
B
Main unit
Component Video
cable
(not included)
TV
Audio cable
§
(not included)
≥
The optical digital audio
cable can be used when
connecting to the TV with
optical out terminals
(
>
right).
Optical
digital audio
cable
§
(not included)
NOTE
TIPS
SURROU
N
D
SURROU
N
D
BACK
OUT
L
R
SURROU
N
D
BACK
L
R
SURROU
N
D
Amplifier with 7.1ch
audio in terminal
Main unit
Amplifier
(not included)
Surround speakers
(not included)
Audio cable
(not included)
Surround back speakers
(not included)
≥
“
[W2S]
” or “
[W4S]
” flashes if the wireless system is
not used. In this case, disconnect the digital
transmitter from the main unit.
SCBT105GN-RQT9252-L.book Page 8 Monday, May 19, 2008 8:39 AM
