10
RQT9252
STEP
4
Setting up
Batteries
Insert so the poles (
i
and
j
) match those in the remote control.
W
hen closing the lid, insert it from the
j
(minus) side.
≥
Do not use rechargeable type batteries.
≥
Do not mix old and new batteries.
≥
Do not use different types at the same time.
≥
Do not heat or expose to flame.
≥
Do not leave the battery(ies) in an automobile exposed to direct
sunlight for a long period of time with doors and windows closed.
≥
Do not take apart or short circuit.
≥
Do not attempt to recharge alkaline or manganese batteries.
≥
Do not use batteries if the covering has been peeled off.
Mishandling of batteries can cause electrolyte leakage which can
damage items the fluid contacts and may cause a fire.
Remove batteries if the remote control is not going to be used for a
long period of time. Store in a cool, dark place.
Use
W
hen the system is switched on for the first time, a screen for the basic settings is displayed automatically. Follow the on-screen prompts to make
basic settings for the system.
Turn on the main unit and wireless system
Turn on the main unit and the wireless system after all connections are completed.
Preparation
Turn on the TV and select the appropriate video input on the
TV.
1
Press [
C
I,
B Í
] on the wireless system.
≥
AUTO OPERATION ON/OFF indicator lights red when
the wireless system is turned on and lights green
when the wireless link is activated.
2
Press [
Í
/I] on the main unit.
≥
Standby/on indicator (
Í
) goes out when the unit is turned on.
≥
W
hen the link between the main unit and the wireless system
is activated, “
[W2S]
” or “
[W4S]
” is illuminated in the main unit’s
display.
≥
If “
[W2S]
” or “
[W4S]
” is flashing in the main unit’s display, check
that the digital transmitter at the back of the main unit is
inserted correctly.
Remote control
AUTO OPERATION ON/OFF
A
V
1
R
TUNED
SLP
SD
iPod
DISC
W4S
W2S
e.g., “
[W2S]
”
R6/LR6, AA
30˚
30˚
30˚
10˚
Remote control signal sensor
7 m directly in front of the unit
If you cannot operate the unit using the remote control after
changing the batteries, please re-enter the codes (
>
43).
Easy Setting
1
Press [
Í
].
Setup screen appears.
≥
If this unit is connected to a Panasonic TV (VIERA) supporting HDAVI Control 2 or
HDAVI Control 3 via an HDMI cable, then the “On-screen Language” and “TV Aspect”
setting information on the TV are captured from the TV.
2
Follow the on-screen instructions and make the settings with
[
3
,
4
] and [OK].
“On-screen Language” (
>
35) and “TV Aspect” (
>
36) are set.
≥
You can perform this setup anytime by selecting “Easy Setting” in the Setup menu. (
>
34)
≥
You can also change these settings individually. (
>
35, 36)
[
Í
]
[OK]
[
3
,
4
]
Standby/on indicator (
Í
)
AUTO OPERATION ON/OFF
indicator
SCBT105GN-RQT9252-L.book Page 10 Monday, May 19, 2008 8:39 AM
