6
RQT8043
RQTX0266
ES
P
A
Ñ
O
L
ES
P
A
Ñ
O
L
ES
P
A
Ñ
O
L
ES
P
A
Ñ
O
L
ES
P
A
Ñ
O
L
Making the connections (continued)
Optional antenna connections
Optional antenna connections
Use an outdoor antenna if radio reception is poor.
Note:
Disconnect the outdoor antenna when the unit is not in use.
Do not use the outdoor antenna during a lightning storm.
FM outdoor antenna
FM outdoor antenna
(not included)
75
Ω
coaxial cable
(not included)
Rear panel of
this main unit
AM outdoor antenna
AM outdoor antenna (not included)
AM loop antenna (included)
5 to 12 m
Rear panel of
this main unit
Push
• Disconnect the FM indoor antenna.
• The antenna should be installed by a competent technician.
• Run a piece of vinyl wire horizontally across a window or other
convenient location.
• Leave the loop antenna connected.
DEMO function
7
, –DEMO
When the unit is fi rst plugged in, a demonstration of its functions may be
shown on the display.
If the demo setting is off, you can show a demonstration by selecting “DEMO
ON”.
Press and hold [
7
, –DEMO] (demo) on the main unit.
The display changes each time you press and hold the button.
DEMO OFF (off)
DEMO ON (on)
While in standby mode, select “DEMO OFF” to reduce power consumption.
Note:
DEMO function cannot be turned on when dimmer function is on.
Handling of the disc trays and discs
Not doing the following will cause damage to the unit.
Removing the power plug
Press [
y
/I, POWER] to turn off the unit and remove the power plug only after all the displays have disappeared.
Inserting a disc
Tray caution
• Place the disc correctly with the label facing up as shown in the diagram.
• Insert one disc into the tray.
• Always press [
0
, OPEN/CLOSE] to insert or remove
a disc.
• Do not push or pull out the tray by hand as this will
cause an accident.
RQTX0266-M_en.indd 6
RQTX0266-M_en.indd 6
4/20/09 10:02:11 AM
4/20/09 10:02:11 AM
