RQT7834
4
(R)
(L)
4
AC power supply cord
Note
The included AC power supply cord
is for use with this unit only.
Do not use it with other equipment.
For your reference
To save power when the unit is not
going to be used for a long time,
unplug it from the household AC outlet.
You will need to reset some memory
items after plugging in the unit.
2
AM loop antenna
Stand the antenna up
on its base.
1
2
1
FM indoor antenna
Affix where reception
is best.
1
2
Adhesive
tape
Set-up
Connect the AC power supply cord only after all other connections have been made.
Optional antenna connections (
A
page 10).
Preparation
Twist and pull off the vinyl tip of the antenna wires and speaker cords.
Connection
3
Speakers
Placement
Place the front speakers so that the super tweeter is on the
inside.
Note
•
Keep your speakers at least 10 mm (
13
/
32
˝) away from the system
for proper ventilation.
•
These speakers do not have magnetic shielding. Do not place
them near televisions, personal computers or other devices easily
influenced by magnetism.
•
You cannot take the front net off the speakers.
Front speaker
(right)
Super tweeter
Place on the floor or a
sturdy shelf so that it
won’t cause vibration.
Connect the left (L) side
in the same way.
Blue (–)
Gray (+)
Red (+)
(SB-WAK630)
Subwoofer
Red
Red
Gray
Black
Blue
Black (–)
Black
Red (+)
Black (–)
Super tweeter
Main unit
Front speaker
(left)
Subwoofer
Use only the supplied speakers.
The combination of the main unit and speakers provide the best sound.
Using other speakers can damage the unit and sound quality will be
negatively affected.
Notes on speaker use
•
You can damage your speakers and shorten their useful life if you
play sound at high levels over extended periods.
•
Reduce the volume in the following cases to avoid damage.
– When playing distorted sound.
– When adjusting the sound quality.
Caution
•
Use the speakers only with the recommended
system. Failure to do so may lead to damage to
the amplifier and/or the speakers, and may result
in the risk of fire. Consult a qualified service
person if damage has occurred or if you
experience a sudden change in performance.
•
Do not attach these speakers to walls or
ceilings.
Turning the demo function on/off
When the unit is first plugged in, a demonstration of its functions may
be shown on the display.
If the demo setting is off, you can show a demonstration by selecting
“DEMO ON”.
Press and hold [DISP, –DEMO].
The display changes each time the button is held down.
NO DEMO (off)
DEMO ON (on)
While in the standby mode, select “NO DEMO” to reduce power
consumption.
Note
DEMO function cannot be turned on when Dimmer is on.
S.WOOFER
H.BASS
DISP, –DEMO
