Panasonic SA-PTX7, Руководство по обслуживанию

Страница: 60 / 213

10.3.3. Power Supply Error Code Table
Error
Code
F61 The abnormalities In normal operation, when DCDET2 Press [ STOP] on
in an output or power goes to "L" (Low) (Not during POWER main unit for next error.
supply circuit of OFF condition), F61 appears on FL
POWER AMP Display and PCONT goes to "L" (Low).
This is due to speaker output has DC
voltage or fan is not working.
F76 Abnormality in the In normal operation when DCDET1 is Press [ STOP] on
output voltage of detected "L" (Low) for two consecutive main unit for next error.
stabilized power times, F76 is displayed on FL for 2
supply seconds and after that PCONT will be
turned to "L" (Low). This is due to any of
the DC voltages (+9V, +7V, -7V, +5V,
+5.3V etc.) not available.
H19 Abnormality in the When the fan motor stops operating Press [ STOP] on
fan operation during power-up at normal operation. main unit for next error.
After 1 seconds, the unit will
automatically shutdown to standby
mode after the error code appears on
the FL display.
U59 Abnormality in the When there is a detection of Press [ STOP] on
digital amp IC abnormality to the digital amp IC at main unit for next error.
time of normal operation. After 1
seconds, the unit will automatically
shutdown to standby mode after the
error code appears on the FL display.
Diagnosis Contents Description of error Automatic FL Display Remarks
10.3.4. ECC Error Code Table
Error
Code
F600 Administrative It becomes impossible NaviPack etc. Press [ STOP] on
information cannot were done, and not to be able to main unit for next error.
be acquired by the acquire necessary information in the
recovery error. navigation’s changing due to wound
etc. of DISC, and to have done the
reproduction transition.
F601 Irregular sector ID It tried to access the position that did Press [ STOP] on
was demanded. not exist on DISC by the recording main unit for next error.
error etc. of authoring.
F603 KEYDET cannot be The data for decoding copyright Press [ STOP] on
acquired by the protection (CSS) cannot be acquired main unit for next error.
recovery error. due to wound etc. of DISC, and it is not
possible to reproduce.
Diagnosis Contents Description of error Automatic FL Display Remarks
60
SA-PTX7P