Panasonic SA-HT680PL, Руководство по обслуживанию

Страница: 65 / 133

· This schematic diagram may be modified at any time
with the development of new technology.
Notes:
S6900: Standby / on switch ( ).
S6901: Drawer open / close switch (
Open / Close).
S6902: Disc change button (DISC CHANGE
).
S6903-S6907: Disc switch (DISC1-DISC5).
S6908: Disc check switch.
S6909 F. skip, search and Tuning switch
(
/ / TUNING ).
S6910: R. skip, search and Tuning switch
(
/ / TUNING ).
S6911: Source select switch (SELECTOR).
S6912: Progressive out switch.
S6913: CD / Tune mode switch [ / TUNE
MODE].
S6915: Play and memory switch (
Memory).
S6916: Pause and FM mode switch( FM
MODE).
S6917: Stop and TUNE mode switch (
TUNE MODE).
VR6900: Volume control.
·
Indicated voltage values are the standard values for the unit
measured by the DC electronic circuit tester (high-
impedance) with the chassis taken as standard. Therefore,
there may exist some errors in the voltage values,
depending on the internal impedance of the DC circuit
tester.
·
Important safety notice:
Components identified by mark have special
characteristics important for safety.
Furthermore, special parts which have purposes of fire-
retardant (resistors), high-quality sound (capacitors), low-
noise (resistors), etc. are used.
When replacing any of components, be sure to use only
manufacturer´s specified parts shown in the parts list.
· The supply part number is described alone in the
replacement parts list.
· Voltage and signal line
: +B Signal line
: CD-DA signal line
: Main signal line
: DVD (Video) signal line
: DVD (Audio) signal line
: FM/AM signal line
: -B Signal line
Caution!
IC and LSI are sensitive to static electricity.
Secondary trouble can be prevented by taking care during
repair.
Cover the parts boxes made of plastics with aluminum foil.
Ground the soldering iron.
Put a conductive mat on the work table.
Do not touch the legs of IC or LSI with the fingers directly.
20 Schematic Diagram Notes
65
SA-HT680PL