Rx450AC Rx550DC MK3 Installation Manual - V19 30Sep05.doc
Page 7/28
CABLE CONNECTION METHOD
Cage clamp connectors
The cage clamp connector is a simple-to-use method of attaching cables to PCBs quickly
and easily. Prepare cables as follows:
1. Use only cable between 0.08 and 2.5 mm²
2. Strip the cable to a length of 5 to 6 mm (0.23 in)
The correct method of attachment is as follows:
1. Press down the relevant terminal block lever with a suitable screwdriver;
2. Insert wire;
3. Remove screwdriver.
The procedure for detaching wires is the reverse of the 3 attachment steps, ensuring that
power is disconnected
before starting.
