Panasonic PX380G-BS300, Руководство по эксплуатации

Страница: 186 / 229

– 186 –
Chapter 9 Connecting to External Devices — Connecting to the extension control unit (AG-EC4G)
Connecting to the extension control unit (AG-EC4G)
f Connect the extension control unit AG-EC4G (optional) to remote-control some functions.
f When you connect AG-EC4G and set the <POWER> switches of the camera and AG-EC4G to <ON>, the camera automatically enters the remote
control mode.
f Remove AG-EC4G, or ensure the AG-EC4G <POWER> switch is <OFF> to release remote control mode.
f You cannot go to the AG-EC4G remote control mode when remote control in an IP connection is enabled. Remote control in an IP connection is
enabled when [IP REMOTE] is illuminated or flashing on the [STATUS] screen of the mode check displayed when you turn the <DISP/MODE CHK>
switch to the <CHK> side. Set the camera’s main menu
→ [NETWORK SETUP] → [NETWORK FUNC] → [IP REMOTE] to [DISABLE].
<REMOTE> terminal AG-EC4G
Switch functionality in remote control mode
The following switches and buttons on the camera do not function in remote control mode.
f <SHUTTER> switch
f <MENU> button
f Jog dial button
f <GAIN> switch
f <OUTPUT>/<AUTO KNEE> selector switch
f <WHITE BAL> switch
f <USER MAIN> button
f <USER1> button
f <USER2> button
Recording and playback operations in remote control mode
Recording/playback operations can be performed both on the camera and AG-EC4G when the remote control unit is connected.
Remote control unit connected to the camera
When AG-EC4G is connected to the camera, the operations of the following functions differ from the descriptions in the Operating Instructions supplied
with AG-EC4G.
r <CHARA> button
Selects if the character is superimposed to the video signal output from the <SDI OUT2/IN> terminal, the <HDMI> terminal, and the <GL IN/VIDEO
OUT> terminal of the camera.
The setting of the [CHR] item in [SET03:MON OUT SETUP] of SmartUI will be disabled.
r <USER2> button
Has the same function as the camera’s <THUMBNAIL> button.
The thumbnail screen is displayed on the viewfinder and the monitor screen connected to the camera.
@ @
NOTE
t The status adjusted with AG-EC4G connected will always be recorded on the camera. The setting of the <DATA SAVE> switch for AG-EC4G is
currently disabled.
t When connecting or removing a dedicated cable, be sure to set the <POWER> switch of the camera and AG-EC4G to <OFF>.
t Use a cable or optional cable that is dedicated for AG-EC4G. Otherwise, a malfunction may result.
t For details on the current from the <REMOTE> terminal, refer to “Details of the connector signals” (page 224).
t For details, refer to the Operating Instructions of AG-EC4G.