Panasonic PX380G-BS300, Руководство по эксплуатации

Страница: 121 / 229

– 121 –
Chapter 5 Playback — Thumbnail operations
2
Use the cursor buttons to move the cursor over the item to be checked, and press the <SET> button.
Settings of the uploaded metadata can be checked. (Fig. 1)
3
While checking the settings for the metadata, use the cursor buttons to move the cursor over the item where you want to change
the setting, and press the <SET> button.
f A software keyboard screen is displayed, allowing you to modify the setting. (Fig. 2)
f While holding down the <SHIFT> button, press the cursor buttons ( ` / { ) to move to the beginning or end of the setting details to be changed.
Setting whether to record the uploaded metadata
Set [ON]/[OFF] in the main menu → [RECORDING SETUP] → [REC META DATA] → [RECORD]. [OFF] is set in the factory settings.
Selecting the [USER CLIP NAME] recording method
Select the [USER CLIP NAME] recording method from the two of [TYPE1] and [TYPE2] in the main menu → [RECORDING SETUP] → [REC META
DATA] → [USER CLIP NAME].
r
[TYPE1] (factory settings)
Status of clip metadata [USER CLIP NAME] to be recorded
When clip metadata has been loaded Uploaded data
When no clip metadata has been loaded, or when setting disables recording of loaded clip
metadata
Same as [GLOBAL CLIP ID]
r [TYPE2]
Status of clip metadata [USER CLIP NAME] to be recorded
When clip metadata has been loaded Uploaded data + [COUNT] value*
When no clip metadata has been loaded, or when setting disables recording of loaded clip
metadata
Same as [CLIP NAME]
* The [COUNT] value is indicated as a four-digit number.
The [COUNT] value is incremented each time a new clip is generated, if the clip metadata has been loaded and [TYPE2] has been selected as the recording
method.
The [COUNT] value can be reset using the following method.
When you select [PROPERTY] in the main menu
→ [RECORDING SETUP] → [REC META DATA] and then select [USER CLIP NAME], the following screen is
displayed. Move the cursor over [COUNT RESET], and press the <SET> button to reset the [COUNT] value to 1.
Selecting the [CARD SERIAL] recording
When [ON] is selected in the main menu → [RECORDING SETUP] → [REC META DATA] → [CARD SERIAL], the function that records the serial
number of the P2 card as metadata (text memo without offset) is enabled.
Initializing the metadata setting
Select [INITIALIZE] in the main menu → [RECORDING SETUP] → [REC META DATA]. Select [YES] when the confirmation screen is displayed.
The settings in the main menu → [RECORDING SETUP] → [REC META DATA] and later items, including loaded metadata, are initialized.
Setting metadata display language
When [NTSC (J)] is selected for the region of use, the language used to display metadata can be set.
Select [LANGUAGE] in the main menu
→ [RECORDING SETUP] → [REC META DATA], select the display language, and press the <SET> button.
For a language, select either [ENGLISH] or [JAPANESE].
@ @
NOTE
t Characters that cannot be displayed in English are not displayed properly but are displayed as “ * ”.
t Only alphanumeric characters can be entered.