Panasonic PX380G-BS300, Руководство по эксплуатации

Страница: 138 / 229

– 138 –
Chapter 6 Menu Operations — Menu list
Item Description of settings
[ATW TARGET R] Finely adjusts the Rch output for convergence with auto tracking white balance operation.
[ − 10]…[10]
f Factory setting: [0]
[ATW TARGET B] Finely adjusts the Bch output for convergence with auto tracking white balance operation.
[ − 10]…[10]
f Factory setting: [0]
[W.BAL PRESET] Sets the color temperature to be assigned to the <PRST> position of the <WHITE BAL> switch.
[3200K], [5600K], [VAR]
f Factory setting: [3200K]
[W.BAL VAR] Sets the value of [VAR] in [W.BAL PRESET].
It can also be operated by the jog dial button.
Enabled when [W.BAL PRESET] is set to [VAR] and the <WHITE BAL> switch is at <PRST>.
[2000K]…[15000K]
f Factory setting: [3200K]
[FOCUS ASSIST MODE] Sets the operation mode of the focus assist function.
[EXPAND]: The center of the viewfinder is displayed enlarged.
[FOCUS IN COLOR]: Outlines the contour of the video in color.
f Factory setting: [EXPAND]
[FOCUS IN COLOR
SETTING]
[PEAKING COLOR] Selects the color of contour when [FOCUS IN COLOR] is selected in [FOCUS ASSIST MODE].
[RED]: Outlines the contour in red.
[GREEN]: Outlines the contour in green.
[BLUE]: Outlines the contour in blue.
f Factory setting: [RED]
[PICTURE B/W] Selects either color or black and white for the image when [FOCUS IN COLOR] is selected in [FOCUS
ASSIST MODE].
[ON]: Displays the image in black and white.
[OFF]: Displays the image in color.
f Factory setting: [OFF]
[EXPAND MODE] Selects the method to cancel expanded display when [EXPAND] is selected in [FOCUS ASSIST MODE].
[10SEC]: Cancels in 10 seconds.
[HOLD]: Does not cancel until the <FOCUS ASSIST> button is pressed again.
[UNTIL REC]: Cancels when recording starts. Expanded display is not available during recording.
f Factory setting: [10SEC]
[IRIS GAIN] Sets whether to perform the iris correction on the camera or on the lens.
[CAM]: Performs the iris correction on the camera.
[LENS]: Performs the iris correction on the lens.
f Factory setting: [CAM]
[IRIS GAIN VALUE] Sets the adjustment value of [IRIS GAIN]. When [CAM] is selected in [IRIS GAIN], this setting is enabled.
[1]…[20]
f Factory setting: [10]
[A.IRIS WINDOW] Selects the auto iris detection window.
[NORM1]: Window that is near screen center.
[NORM2]: Window that is near screen bottom.
[CENTER]: Window that is a spot in the screen center.
f Factory setting: [NORM1]
[AGC] Sets the operation of the auto gain control.
[ON]: Performs the operation of the [AGC] function that automatically adjusts camera gain.
[OFF]: Does not perform the operation of the [AGC] function that automatically adjusts camera gain.
f Factory setting: [OFF]
[AGC LIMIT] Sets the maximum gain value during [AGC] operation.
[3dB], [6dB], [12dB], [18dB]
f Factory setting: [12dB]
[AGC POINT] Sets the F value to switch control from auto iris to [AGC] during [AGC] operation.
[F2.8], [F4.0], [F5.6]
f Factory setting: [F2.8]
[AUTO KNEE SW] Enables/disables the auto knee and dynamic range stretcher functions.
[DRS]: Activates the dynamic range stretcher function when the <OUTPUT>/<AUTO KNEE> selector
switch is set to <ON>.
[ON]: Activates the auto knee function when the <OUTPUT>/<AUTO KNEE> selector switch is set to
<ON>.
[OFF]: Does not activate the auto knee and dynamic range stretcher functions when the
<OUTPUT>/<AUTO KNEE> selector switch is set to <ON>.
f Factory setting: [ON]
[WFM MODE] Selects the type of waveform to be displayed in the viewfinder when the USER button to which the [WFM]
function is assigned is pressed.
[WAVE]: Displays as a waveform.
[VECTOR]: Displays as a vector.
[WAVE/VECTOR]: The display changes in order of (no display) → [WAVE] (waveform) → [VECTOR]
(vector)
→
(no display) every time the USER button assigned with [WFM] is pressed.
f Factory setting: [WAVE]
[BARS TYPE] Selects the color bar to use.
[SMPTE]: Uses the color bar in the SMPTE standard.
[FULL BARS]:
Uses full color bars.
[SPLIT]: Uses SPLIT color bars for SNG (Satellite News Gathering).
[ARIB]:
Uses ARIB standard color bars.
f Factory setting: [SMPTE]