Panasonic PX380G-BS300, Руководство по эксплуатации

Страница: 146 / 229

– 146 –
Chapter 6 Menu Operations — Menu list
[NETWORK SETUP]
Configure the settings regarding the network.
Item Description of settings
[USB MODE SELECT] Sets the camera operation mode when an external device is connected to the USB.
[STORAGE]:
Sets the mode to be used with connected devices such as an external hard disk drive.
[DEVICE]: Selects the USB device mode for using P2 cards as mass storage, using computers or other
devices connected via USB 2.0.
f Factory setting: [STORAGE]
[USB MODE] Enables/disables the mode selected in [USB MODE SELECT].
[ON], [OFF]
f Factory setting: [OFF]
[NETWORK SEL] Sets the connection method when connecting the camera with an external device (such as a computer) via
network.
[WLAN]: Connects via wireless LAN.
[4G/LTE]
: Connects via 3G/4G/LTE.
[LAN]: Connects via the <LAN> terminal.
[OFF]:
Does not connect.
f Factory setting: [OFF]
[NETWORK FUNC] [HTTP SERVER] Configures the settings regarding the HTTP server.
[BROWSE]: Enables the P2 browser function.
[BROWSE (
+
CTRL)]:
Enables the HTTP server function, starting and stopping recording at the terminal
side, and preset control of time code or user bits.
[DISABLE]:
Disables the HTTP server function.
f Factory setting: [DISABLE]
[PLAYLIST] Sets entering/exiting of the playlist edit mode.
[ON], [OFF]
f Factory setting: [OFF]
[IP REMOTE] [ENABLE]: Enables remote control with IP connection.
[DISABLE]: Disables remote control with IP connection.
f Factory setting: [DISABLE]
[USER ACCOUNT] Sets the user account name.
[ACCOUNT LIST] Displays the currently set user account name. Registering of new accounts, deleting accounts, or changing
password can also be performed.
[FTP CLIENT SERVICE] [SETTING DATA] Sets the source from where client service settings are acquired.
[INTERNAL]: Uses the setting value set on the camera.
[SD CARD]: Uses the setting value of the file inside the SD memory card inserted in the SD card slot.
When this item is set to [SD CARD], insert an SD memory card before turning on the power of the camera.
f Factory setting: [INTERNAL]
f [SERVER URL] Sets the server name or an address to connect to.
f
[LOGIN USER] Sets the user ID to connect to.
f [LOGIN PASSWORD] Sets the password to connect to.
The menu setting value is displayed with [ * ].
f [SSH] Sets when transferring files using SSH.
[ENABLE]: Uses SSH.
[DISABLE]: Does not use SSH.
f Factory setting: [DISABLE]
f [SSH PORT] Sets the network port number when SSH is used. Set the same number as that of the server side.
The menu setting value is displayed with [ * ].
f Factory setting: [22]
f [LOAD (SD CARD)] Loads the setting value of the client service from the SD memory card.
f [SAVE (SD CARD)] Saves the setting value of the client service onto the SD memory card.
[REC DURING
UPLOAD]
Sets whether to use the rec during upload function.
[ENABLE]: Uses the rec during upload function.
[DISABLE]:
Does not use the rec during upload function.
f Factory setting: [DISABLE]
[AUTO UPLOAD] Sets whether to enable the function to register clips recorded using the camera automatically to the upload
list when recording stops, and if enabled, sets the type of target clip.
[REC CLIP(PROXY)]:
Upload target is proxy data of recorded clips.
[REC CLIP]: Upload target is recorded clips (main recording data and proxy data).
[DISABLE]:
Does not automatically upload recorded clips.
f Factory setting: [DISABLE]
[UPLOAD LIST] Displays the list information of clips to upload.
[SAVE LOG (SD CARD)] Save up to the latest 1000 logs for clip information (month and date, clip number (global clip ID), status)
registered in the upload list to an SD memory card.
[STREAMING SETTING] [START TRIGGER] Sets the method for starting video streaming.
[CAMERA]: Starts/stops streaming from the camera.
[RECEIVER]: Operates the start/stop of the streaming distribution from the terminal on the network using
the P2 Browser or the P2 Streaming Receiver.
f Factory setting: [RECEIVER]