Before using
16
LSQT0860
ª
Inserting/removing the cassette
≥
When the cassette holder is in motion, do not
touch anything except the [PUSH] mark.
≥
When inserting a previously recorded cassette,
use the blank search function to find the position
where you want to continue recording. If you
overwrite-record on a previously recorded
cassette, be sure to find the position where you
want to continue recording.
≥
Close the cassette cover tightly.
≥
When closing the cassette cover, do not get
anything, such as a cable, caught in the cover.
ª
Accidental erasure prevention
If the accidental erasure prevention slider
1
of a
cassette is opened (slide in the direction of the
[SAVE] arrow), the cassette cannot be recorded.
When recording, close the accidental erasure
prevention slider of the cassette (slide in the
direction of the [REC] arrow).
Inserting/removing a card
Before inserting/removing a card, be sure to turn
the power [OFF].
≥
If the card is inserted or removed with the power
turned on, this Camcorder may malfunction or
the data recorded on the card may be lost.
1
Open the LCD monitor and then open the
card slot cover.
2
Insert/remove the card into/from the card
slot.
≥
When inserting a card, face the label side
1
towards you and push it straight in with one
stroke as far as it goes.
≥
When removing the card, open the card slot
cover and press the center of the card and
then pull it straight out.
3
Securely close the card slot cover.
ª
Concerning the card
≥
Do not touch the terminals on the back of the
card.
≥
Do not format the card with another Camcorder
or any personal computer. This operation may
make the card unusable.
≥
Electrical noise, static electricity, or failure of the
Camcorder or the card may damage or erase
the data stored on the card. We recommend
saving important data on a personal computer
by using a USB cable, PC card adaptor, or USB
reader/writer.
R E C
SAVE
1
1
LSQT0860ENG.book 16 ページ ２００５年８月１８日 木曜日 午前１１時４３分
