Before using
12
LSQT0860
(39)
Shoulder strap fixture
≥
Put the strap through the fixture
1
and through
the stopper
2
so it will not come off. Extend
part
3
by at least 1 inch (2 cm).
≥
Fit the other end of the belt similarly.
(40)
Lens hood
In order to remove the lens hood, rotate it
counter-clockwise
1
. In order to fit it, put into slot
2
, and then rotate it clockwise.
Fitting the lens cap
Fit the lens cap to protect the surface of the lens.
1
Remove the grip belt. Run the end of the
lens cap cord through the hole in the grip
belt attachment and run the lens cap
through the lens cap cord.
≥
The lens cap removed can be attached to the
lens cap fixture. (It cannot be hung if the grip
belt is used as a hand strap.)
≥
To fit or remove the lens cap, hold both sides of
the lens cap with the tips of your finger and
thumb.
The one-touch free-style grip belt
ª
To use as a hand strap
If you use the grip belt as a hand strap, then you
can carry or handle this Camcorder more easily.
1
Open the lock cover
1
by pinching the
projections
2
on both sides. Press the lock
button
3
to remove the grip belt.
≥
When removing the grip belt, tightly hold the
Camcorder with both hands.
≥
After removing the grip belt, restore the lock
cover to the original position.
2
Adjust the belt length.
1
Flip the belt.
2
Slide
1
in the direction indicated by the arrow.
3
Fix the belt.
3
Put your hand through the strap.
≥
Hold the Camcorder not to cover the
microphones or the sensors with your hands.
(39)
3
2
1
1
2
(40)
2
1
3
1 3
1
2
LSQT0860ENG.book 12 ページ ２００５年８月１８日 木曜日 午前１１時４３分
