Before using
14
LSQT0973
(37)
Shoulder strap fixture
≥
Put the strap through the fixture
1
and through
the stopper
2
so it will not come off. Extend
part
3
by at least 2 cm (1 inch).
≥
Fit the other end of the belt similarly.
(38)
Lens hood
In order to remove the lens hood, rotate it
counter-clockwise
1
. In order to fit it, put into slot
2
, and then rotate it clockwise.
Attaching the lens cap
Attach the lens cap to protect the surface of the
lens.
1
Run the end of the lens cap cord through
the hole in the grip belt attachment part and
run the lens cap through the lens cap cord.
≥
When removed, the lens cap can be attached to
the lens cap fixture.
≥
To attach or remove the lens cap, hold both
sides of the lens cap with the tips of your first
2 fingers.
The grip belt
Adjust the belt length so it fits your hand.
1
Adjust the belt length and the pad position.
1
Flip the belt.
2
Adjust the length.
3
Fix the belt.
(37)
3
2
1
1
2
(38)
1 3
2
LSQT0973ENG.book 14 ページ ２００６年１月３０日 月曜日 午前１１時４０分
