Before using
22
LSQT0973
7
Press the joystick to determine the setting.
ª
To exit the menu screen
Press the [MENU] button.
ª
To get back to the previous screen
Move the joystick left.
ª
About the menu setting
≥
The menu screen does not appear during
recording. And you cannot record when the
menu screen appears.
ª
Operating with remote control
(optional)
The menu screen transition is the same as when
the buttons on the main unit are used.
1
Press the [MENU] button.
2
Select a menu item.
≥
Use the direction buttons
(
3
,
2
,
1
,
4
) and
[ENTER] button in place of the joystick on the
main unit.
3
Press the [MENU] button, to exit the menu
screen.
Setting date and time
If the screen shows the incorrect date/time, then
adjust it.
≥
Set to Tape Recording Mode or Card
Recording Mode.
1
Set [BASIC] >> [CLOCK SET] >> [YES].
2
Move the joystick left or right in order to
select the item to be set. Then move the
joystick up or down to set the desired value.
≥
The year will change as follows:
2000, 2001, ..., 2089, 2000, ...
≥
The 12-hour clock is used.
3
Press the joystick to determine the setting.
≥
The clock function starts at [00] seconds.
ª
About date/time
≥
The date and time function are driven by a
built-in lithium battery.
≥
Make sure to check the time before recording
because the built-in clock is not very accurate.
ª
Recharging the built-in lithium battery
≥
If [
0
] or [--] is indicated when the Camcorder is
turned on, then the built-in lithium battery has
run down. Connect the AC adaptor to the
Camcorder or place the battery on the
Camcorder, and the built-in lithium battery will
be recharged. Leave the Camcorder as is for
approx. 24 hours, and the battery will drive the
date and time for approx. 6 months. (Even if the
[OFF/ON] switch is set to [OFF], the battery is
still being recharged.)
2006
LSQT0973ENG.book 22 ページ ２００６年１月３０日 月曜日 午前１１時４０分
