Panasonic PT47WXD63 - 47" PROJECTION TV, Техническое руководство

Страница: 33 / 99

First Time Setup
RF input configuration depending on the signal source
Note:
No video will be displayed in this setup mode.
Procedure
•
Press
VOL
f
to select Cable only, Cable/Antenna or Antenna only.
•
Press the
OK
button to underline your selection.
When the next screen is displayed, press the
OK
button to start the Auto Scan.
All available channels with a signal will be programmed into memory.
Auto Scan
This feature allows you to selectively auto scan channels. You can Scan All,
Analog only channels or Analog & Digital channels.
Procedure
•
Press the
OK
button to start Auto Scan.
•
After Auto Scan is completed the PTV tunes to the first channel found
during auto scan.
Notes:
•
If the EXIT button is pressed at anytime during Auto Scan, the First Time
Setup menu will be cancelled and the PTV will tune to analog channel 2
on ANTENNA (A).
•
If a DCM (Digital Cable Module) is present during the First Time Setup
and Antenna (A) is set to cable, Antenna (A) will not be scanned due to
the DCM providing the channel map.
Figure 8
Figure 9
29