Panasonic PT47WXD63 - 47" PROJECTION TV, Техническое руководство

Страница: 17 / 99

In a typical cable system, the value of T may be over 300, whereas
are smaller, typically ranging from 0 to 50. These
stem configuration.
iagnostic screen, and select a digital cable channel.
sonic Host again. The
gital
8) Under the
FAT Status
section, verify that:
QAM or 256 QAM)
9)
ID
10)
Th
Ca
is
"able t me
CableC (in
the
The above steps list the basic requirements to obtain a channel map and to tune
a digital service. If you are unable to obtain digital services on your Panasonic
host, plea
te of the data outlined in the above steps, as this will be
useful fo ng your problem.
Frequ
Q. Ho
A. The FDC is c
the FD
given F
CabIe
s, a CabIeCARD supplied diagnostic menu
may a te the hunting process. To
access ss OK while the
HOST
values of D, F, and M
numbers will vary depending on the cable sy
lue for T is larger the values for D, F, and M. Verify that the va
Exit the HOST d
7) Invoke the HOST diagnostic screen on the Pana
next items in this checklist cover the things that are needed to get di
services.
a. The
Mode
is correct. (64
b. The
Frequency
is correct.
c. The
Lock Status
indicates
Locked
Under the
Video / Channel Status
section, verify that:
a. The
PCR Status
indicates
Locked.
b. The PCR, Video, and Audio PIDs are numeric values. If the P
values are N/A, it indicates that PIDs have not been set.
Under the
System
section, note the value of
Authorization status.
is value comes from the CabIeCARD, and may vary depending on the
bIeCARD manufacturer. Typically, a value of
0x01
means the CableCARD
o decrypt", and a value other than that means "not able to decrypt". So
ARDs may indicate a value other than 0x01 when playing unencrypted
clear) video.
se take no
rmation in debuggi in
ently Asked Questions:
w can the host be set to the correct FDC Frequency?
ontrolled by the CabIeCARD. A CabIeCARD must be present for
C tuning process to begin. The CabIeCARD instructs the host to tune to a
DC frequency. Any frequency-hunting algorithm comes from the
CARD. In some CabIeCARD
llow the setting of an FDC frequency, or initia
the CabIeCARD supplied diagnostic menus; pre
diagnostic screen is active.
13