Panasonic PT43LCX64 - MMD DIGITAL TUNER, Руководство по обслуживанию

Страница: 72 / 117

-2-
a. Mechanical Picture Position Adjustment (Tilt)
1) Loosen the 4 Screws on the Projection Unit.
Fig. M1-5
2) Adjust the Projection Lens by twisting so that the long
line "g" and the long line "h" are within 4 dots. (The long
line "g" and the long line "h" will be almost aligned
horizontally.)
Note:
If the Projection Lens is twisted left, the Focus Screen twists
left.
If the Projection Lens is twisted right, the Focus Screen
twists right.
3) Tighten the 4 Screws while fixing the Projection Lens.
Screw
Projection Lens
Twist Twist
Screw
Screw
Screw
<Front View>
<Focus Screen> "G" "H"
within 4 dots
long line "g"
long line "h"
"G" "H"
O P T H P O S I 0 7
O P T V P O S I 0 3
b. Focus Adjustment
1) Confirm that each of the pixels in the nine portions is
clearly visible.
2) If not, loosen the Knob on the Projection Lens until the
Knob can be moved.
Fig. M1-6
3) Adjust the Knob by moving up or down so that each of
the pixels in the nine portions is clearly visible to obtain
the best focus.
4) Tighten the Knob.
Note:
Focus Adjustment is not normally necessary. Perform this
adjustment only if necessary.
<Focus Screen>
O P T H P O S I 0 7
O P T V P O S I 0 3
<Front View>
(PT-60LCX64)
CAUTION:
Do not turn the screw
and nut.
Up
Down
Knob
Tighten
Loosen