Panasonic PT43LCX64 - MMD DIGITAL TUNER, Руководство по обслуживанию

Страница: 50 / 117

-27-
3. 1) Disconnect Connector P2904, and remove the Fan 3 Unit by removing the 2 Screw (402).
2) Remove the Top Duct 3 Unit by removing the 4 Screws (421).
CAUTION:
When removing the Screws (421) on the Top Duct 3 Unit, plastic dust may be produced. Therefore, confirm that there is no dust
on the Top Duct 3 Unit. If there is dust, clean the Top Duct 3 Unit with a brush, etc. Otherwise, dust may adhere to the inside of
the screen.
3) Remove the Lamp from the Projection Unit by loosening the Screw.
Fig. D2-3
Replacement Note of Projection Unit (Ref. No. 21):
These parts will be necessary when replacing the Projection Unit (Ref.No. 21). Set aside, and keep and re-use.
•
Fan 3 Unit
• Top Duct 3 Unit
Fan 3 Unit
GND
Wire
Top Duct 3 Unit
Lamp
Screw
for lamp
402
402
421
421
Clamper
Projection Unit
21
P2904