Panasonic PT-VX61K, Инструкция по эксплуатации (Функциональное руководство), Страница: 83 / 128

[CONTROL DEVICE SETUP]
Enable/disable the button operations on the control panel and the remote control.
1) Press
as
to select [CONTROL DEVICE SETUP].
2) Press the <ENTER> button.
f
The [CONTROL DEVICE SETUP] screen is displayed.
3) Press
as
to select one item between [CONTROL PANEL] and [REMOTE CONTROLLER].
[CONTROL PANEL]
You can limit the control method to the control panel.
[REMOTE CONTROLLER] You can limit the control method to the remote control.
4) Press
qw
to switch between [ENABLE] and [DISABLE].
f
You can limit the control method to the control panel or the remote control.
[ENABLE] Enable the operation of all buttons.
[DISABLE] Disable the operation of all buttons.
f
When you change [ENABLE] to [DISABLE], proceed to Step 5) .
5) When the confirmation screen is displayed, press
qw
to select [OK], and then press the <ENTER>
button.
Note
f
When a button operation is performed on the device set to [DISABLE] , the [PASSWORD] screen is displayed.
To continue operations, enter the security password.
f
The [PASSWORD] screen will disappear when there is no operation for approx. 10 seconds.
f
If the operations of both [CONTROL PANEL] and [REMOTE CONTROLLER] are set to [DISABLE], the projector cannot be turned off
(cannot enter standby).
f
Even when you set button operations on the remote control to be disabled, operations of the <ID ALL> and <ID SET> buttons on the remote
control are enabled.
ENGLISH - 83
Chapter 4 Settings - [SECURITY] menu