Panasonic PT-VX61K, Инструкция по эксплуатации (Функциональное руководство), Страница: 70 / 128

[AUTO] If the image being projected changes to an unregistered signal, the auto setup is automatically performed.
[BUTTON] Enables the auto setup function only when the <AUTO SETUP> button is pressed.
[SIGNAL SEARCH]
Set to enable/disable the signal search function.
If the signal search function is enabled, the input with input signal is automatically selected when the power is
turned on and the projection is started. In addition, if the <AUTO SETUP> button is pressed when the currently
selected input has no signal, it automatically switches to the input with input signal.
1) Press
as
to select [SIGNAL SEARCH].
2) Press
qw
to switch the item.
f
The items will switch each time you press the button.
[ON] Enables the input detection function.
[OFF] Disables the input detection function.
[BACK COLOR]
Set the display of the projected screen when there is no signal input.
1) Press
as
to select [BACK COLOR].
2) Press
qw
to switch the item.
f
The items will switch each time you press the button.
[BLUE] Displays the entire projection area in blue.
[BLACK] Displays the entire projection area in black.
[DEFAULT LOGO] Displays the Panasonic logo.
[USER LOGO] Displays the image registered by the user.
Note
f
To create/register the [USER LOGO] image, use “Logo Transfer Software” included in the supplied CD-ROM.
[P-TIMER]
Set and operate the presentation timer function.
Setting the mode
1) Press
as
to select [P-TIMER].
2) Press the <ENTER> button.
f
The [P-TIMER] screen is displayed.
3) Press
as
to select [MODE].
4) Press
qw
to switch the item.
f
The items will switch each time you press the button.
[COUNT UP] Displays the elapsed time since the count was started.
[COUNT DOWN] Displays the remaining time of the time set by [TIMER].
Setting the countdown timer
1) Press
as
to select [P-TIMER].
2) Press the <ENTER> button.
f
The [P-TIMER] screen is displayed.
3) Press
as
to select [TIMER].
4) Press
qw
to set the time.
f
The time can be set in 1-minute increments from 1 to 180 minutes.
f
The factory default value is 10 minutes.
70 - ENGLISH
Chapter 4 Settings - [DISPLAY OPTION] menu