Chapter 4
Settings — [PROJECTOR SETUP] menu
142 - ENGLISH
f
The zoom and focus positions may have shifted after lens memory was loaded. Readjust as necessary.
Beware of shift, as errors in zoom position are particularly significant.
f
When a lens is replaced, readjust and save the lens memory again.
f
If a lens without zoom function is used, the lens memory of the zoom position does not operate.
f
When [LENS MEMORY LOAD] is assigned to the <FUNCTION> button, the registered lens memory is loaded in order each time you press
the <FUNCTION> button.
Deleting a lens memory
1) Press
as
to select [LENS MEMORY].
2) Press the <ENTER> button.
3) Press
as
to select [LENS MEMORY EDIT].
4) Press the <ENTER> button.
f
The
[LENS MEMORY EDIT]
screen is displayed.
5) Press
as
to select [LENS MEMORY DELETE].
6) Press the <ENTER> button.
f
The
[LENS MEMORY DELETE]
screen is displayed.
7) Press
as
to select the item to delete, and press the <ENTER> button.
8)
When the confirmation screen is displayed, press
qw
to select [OK], and press the <ENTER> button.
Changing the lens memory name
1) Press
as
to select [LENS MEMORY].
2) Press the <ENTER> button.
3) Press
as
to select [LENS MEMORY EDIT].
4) Press the <ENTER> button.
f
The
[LENS MEMORY EDIT]
screen is displayed.
5) Press
as
to select [LENS MEMORY NAME CHANGE].
6) Press the <ENTER> button.
f
The
[LENS MEMORY NAME CHANGE]
screen is displayed.
7) Press
as
to select the name to change, and press the <ENTER> button.
f
The
[LENS MEMORY NAME INPUT]
screen is displayed.
8) Press
asqw
to select the text, and press the <ENTER> button to enter the text.
9)
After the name is changed, press
asqw
to select [OK], and press the <ENTER> button.
f
The registration completes and returns to the
[LENS MEMORY NAME CHANGE]
screen.
f
If you press
asqw
to select [CANCEL] and then press the <ENTER> button, the changed name will not
be registered.
f
If you press
asqw
to select [DEFAULT] and press the <ENTER> button, the changed name will not be
registered and the default name will be used.
f
If you select [OK] without entering any characters and press the <ENTER> button, the default name will be
used.
[STATUS]
Display the status of the projector.
1) Press
as
to select [STATUS].
2) Press the <ENTER> button.
f
The
[STATUS]
screen is displayed.
