manualshive.com logo in svg

Panasonic PT-RZ12K, Руководство по эксплуатации

Поделиться
Скачать
Panasonic PT-RZ12K Скачать руководство пользователя страница 105

Chapter 4

 

Settings — [3D SETTINGS] menu

ENGLISH - 105

Note

 

f

This function is disabled when [3D SYSTEM SETTING] is set to anything other than [SINGLE].

 

f

The crosstalk may get larger or the displayed image may get darker when the setting does not match with the 3D system in use.

[3D FRAME DELAY]

Adjust the timing of the left-right switch of an image.

1)  Press 

as

 to select [3D FRAME DELAY].

2)  Press 

qw

 to switch the item.

[0us] - [25000us]

Sets the amount in 10 us increments.

 

f

The adjustment range depends on the input signal.

[3D TEST MODE]

Set the image display mode for use with 3D system adjustments.

1)  Press 

as

 to select [3D TEST MODE].

2)  Press 

qw

 to switch the item.

[NORMAL]

Normal setting.

[LEFT/LEFT]

Displays the image of the left eye input signal for both the left and right eye image.

[RIGHT/RIGHT]

Displays the image of the right eye input signal for both the left and right eye images.

[LEFT/BLACK]

Displays the image of the left eye input signal for the left eye image, and all black images for the right 

eye image.

[BLACK/RIGHT]

Displays all black images for the left eye image, and the image of the right eye input signal for the 

right eye image.

Note

 

f

The [3D TEST MODE] setting returns to [NORMAL] when the projector is switched off.

 

f

This function is disabled when [3D SYSTEM SETTING] is set to anything other than [SINGLE].

 

f

This function is disabled when [3D TEST PATTERN] is displayed.

[3D TEST PATTERN]

The 3D test pattern can be used to check operation and make adjustments even without a 3D signal.

1)  Press 

as

 to select [3D TEST PATTERN].

2)  Press 

qw

 to switch the item.

Menu input screen

Select a test pattern that is easy to check operation or make adjustment.

Menu left: white/

right: black

Menu left: black/

right: white

Note

 

f

When the [DISPLAY OPTION] menu 

→

 [RGB IN] 

→

 [RGB1 INPUT SETTING] (

x

 page 112) is set to [VIDEO] or [Y/C], the 3D test pattern 

cannot be displayed while the <RGB 1 IN> terminal is selected.

 

f

This function is disabled when [3D SYSTEM SETTING] is set to anything other than [SINGLE].

Содержание PT-RZ12K




























































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды