Chapter 4
Settings — [PROJECTOR SETUP] menu
ENGLISH - 141
3) Press the <ENTER> button.
f
The confirmation screen is displayed.
4) Press
qw
to select [OK], and press the <ENTER> button.
f
To cancel, select [CANCEL].
f
The lens moves up, down, left, and right to detect the lens shift limit value, and automatically set the home
position and the ET-D75LE90 lens standard position.
f
The lens stops to complete the calibration.
Note
f
[PROGRESS] is displayed in the menu during lens calibration. The operation cannot be canceled during calibration.
f
When lens calibration executes correctly, [COMPLETE] is displayed and [INCOMPLETE] is displayed when it does not execute correctly.
f
Pressing the <FOCUS> button on the remote control for at least three seconds will also display the confirmation screen for lens calibration
execution.
[LENS MEMORY]
Save and load the focus position, shift position, and zoom position of an adjusted lens.
Saving lens position
1) Press
as
to select [LENS MEMORY].
2) Press the <ENTER> button.
3) Press
as
to select [LENS MEMORY SAVE].
4) Press the <ENTER> button.
f
The
[LENS MEMORY SAVE]
screen is displayed.
5) Press
as
to select the item to save, and press the <ENTER> button.
6)
When the confirmation screen is displayed, press
qw
to select [OK], and press the <ENTER> button.
f
The
[LENS MEMORY NAME INPUT]
screen is displayed.
7) Press
asqw
to select the text, and press the <ENTER> button to enter the text.
8)
After the name is input, press
asqw
to select [OK], and press the <ENTER> button.
f
The registration completes and returns to the
[LENS MEMORY SAVE]
screen.
f
If you press
asqw
to select [CANCEL] and then press the <ENTER> button, the lens memory will not be
saved.
f
If you press
asqw
to select [DEFAULT] and press the <ENTER> button, the entered name will not be
registered and the default name will be used.
f
If you select [OK] without entering any characters and press the <ENTER> button, the default name will be
used.
Loading the lens position
1) Press
as
to select [LENS MEMORY].
2) Press the <ENTER> button.
3) Press
as
to select [LENS MEMORY LOAD].
4) Press the <ENTER> button.
f
The
[LENS MEMORY LOAD]
screen is displayed.
5) Press
as
to select the item to load, and press the <ENTER> button.
6)
When the confirmation screen is displayed, press
qw
to select [OK], and press the <ENTER> button.
f
The lens moves automatically to the registered shift, zoom, and focus positions.
Note
f
Lens memory is not guaranteed to be 100 % reproduced.
