Panasonic PT-MZ17K Скачать руководство пользователя страница 187

Страница: 187 / 280

Chapter 5

Operations — Web control function

ENGLISH - 187

Status display icon

[POWER]

The power is switched off. (Standby status)

In the projection mode

[SHUTTER]

The shutter function is enabled (shutter: closed).

The shutter function is disabled (shutter: opened).

[OSD]

The on-screen display is set to on (display).

The on-screen display is set to off (hide).

[GEOMETRY]

The [POSITION] menu

→

[GEOMETRY] is set to [OFF].

The [POSITION] menu

→

[GEOMETRY] is set to [KEYSTONE].

The [POSITION] menu

→

[GEOMETRY] is set to [CORNER CORRECTION].

The [POSITION] menu

→

[GEOMETRY] is set to [CURVED CORRECTION].

The [POSITION] menu

→

[GEOMETRY] is set to [PC-1].

The [POSITION] menu

→

[GEOMETRY] is set to [PC-2].

The [POSITION] menu

→

[GEOMETRY] is set to [PC-3].

[LIGHT SOURCE]

The corresponding light source is turned on.

The corresponding light source is is turned off.

[ERROR]

The light source is in warning status.

The light source is in error status.

The temperature is in warning status.

The temperature is in error status.

The filter is in warning status.

The filter is in error status.

A warning other than light source or temperature has occurred.

An error other than light source or temperature has occurred.

Содержание PT-MZ17K

























































































































































































































































































Результаты поиска

Содержание PT-MZ17K

Отзывы:

Panasonic PT-MZ17K, Руководство по эксплуатации, Страница: 187 / 280

Результаты поиска

Содержание PT-MZ17K

Отзывы: