Panasonic PT-MZ17K, Руководство по эксплуатации

Страница: 172 / 280

Chapter 4 Settings — [NETWORK] menu
172 - ENGLISH
[NETWORK SECURITY]
Perform the setting to protect the projector from an external attack or abuse via LAN.
[COMMAND PROTECT]
Perform the setting regarding connection authentication when using the command control function.
1) Press
as
to select [NETWORK SECURITY].
2) Press the <ENTER> button.
f
The [NETWORK SECURITY] screen is displayed.
3) Press
qw
to switch the [COMMAND PROTECT] setting.
[ENABLE]
Connects to the projector in protect mode.
Connection authentication is performed using the user name and password of the administrator
account.
[DISABLE]
Connects to the projector in non-protect mode.
Connection authentication is not performed.
f
The confirmation screen is displayed when the setting is switched.
4) Press
qw
to select [OK], and press the <ENTER> button.
f
The [COMMAND PROTECT] screen is displayed.
5) Press
as
to select [USER NAME], and press the <ENTER> button.
f
The [USER NAME] screen is displayed.
6) Press
asqw
to select the text, and press the <ENTER> button to enter the text.
f
Enter the user name of the administrator account.
7) After the user name is entered, press
asqw
to select [OK], and press the <ENTER> button.
f
The [COMMAND PROTECT] screen is displayed.
8) Press
as
to select [PASSWORD], and press the <ENTER> button.
f
The
[PASSWORD]
screen is displayed.
9) Press
asqw
to select the text, and press the <ENTER> button to enter the text.
f
Enter the password of the administrator account.
10) After the password is entered, press
asqw
to select [OK], and press the <ENTER> button.
f
The [COMMAND PROTECT] screen is displayed.
11) Press
asqw
to select [OK], and press the <ENTER> button.
Note
f
When [COMMAND PROTECT] is set to [DISABLE], the projector becomes vulnerable against a threat on the network because connection
authentication will not be performed. Use this function by understanding the risk.
f
When a password is not set for the administrator account (when blank), [COMMAND PROTECT] cannot be set.
f
For details on how to use the command control function, refer to “Control commands via LAN”. (
x
page 256)
[NETWORK CONTROL]
Set the controls of the projector via the network.
f
To use the network function with the projector, it is necessary to set the password of the administrator account.
(
x
page 169)
1) Press
as
to select [NETWORK CONTROL].
2) Press the <ENTER> button.
f
The [NETWORK CONTROL] screen is displayed.
3) Press
as
to select an item, and press
qw
to change the setting.
[WEB CONTROL] Set to [ON] to control with the web browser.
[COMMAND CONTROL]
Set to [ON] to control with the <SERIAL/MULTI SYNC IN>/<SERIAL/MULTI SYNC OUT> terminal
control command format (
x
page 259). Refer to “Control commands via LAN” (
x
page 256).