22
Connections
Notes on connections
• Read the instruction manual for each system component carefully before
connecting it.
• Turn off the power supply for all components before making any
connections.
• If the cables necessary for connecting a component to the system are not
included with the component or available as an option, you may need to
fashion a cable to suit the component concerned.
• If there is a lot of jitter in the video signal which is input from the video
source, the picture on the screen may flicker. In such cases, it will be
necessary to connect a TBC (time base corrector).
• The projector has a built-in speaker. However, you will need to connect a
separate audio system to the AUDIO OUT jack if your needs specify high
sound volumes. No sound will come out of the projector’s built-in speaker
while the AUDIO OUT jack is being used.
• It may not be possible to connect some types of computer. Refer to the list
of compatible signals on page
60
.
• The pin layout and signal names for the S-VIDEO IN connector are shown
below.
Pin No.
Signal
q
Earth (Luminance signal)
Earth (Color signal)
Luminance signal
Color signal
w
e
r
• The pin layout and signal names for the RGB/YP
B
P
R
(RGB1 IN/RGB2 IN)
connector are shown below.
Pin No.
Signal
q
R/P
R
G/G·SYNC/Y
B/P
B
SDA
w
e
!2
!3
HD/SYNC
!4
VD
!5
SCL
Pin
o
is spare.
Pins
r
–
i
,
!0
and
!1
are for earth.
Pins
!2
and
!5
functions are only valid when
supported by the computer
q
w
e
r
External view
!1
q
t
!0
y
!5
External view
