Panasonic PT-L730NT Скачать руководство пользователя | Manualshive

Страница: 115 / 135

background image

115

3. "Delete" button

Image files selected in the thumbnail display section (17) will be deleted.
A message will be displayed to confirm the deletion. Choose "Yes" to delete, or
"No" to cancel.

Note:

• The deleted image files reside in the Recycle Bin. Any of them can be retrieved

from the bin if you accidentally delete them.

4. [Transmission] button

Image files selected in the thumbnail display section (17) will be transmitted to the projector.
If you want to cancel the transmission, click the "Cancel" button.

5. Automatic display

Images shown in thumbnails (17) will be replayed automatically.
The image currently selected, shown in the preview screen (16), will be first
displayed in automatic display mode.
To cancel transmission, click the "Cancel" button.
If you want to stop the automatic display, click the "Stop" button (7).
When the automatic display comes to an end, the top image will be selected.
For details of the advanced setting in automatic display, refer to the Paragraph 14 "Options".
In presentation mode, the personal computer uses the projector exclusively so
that images cannot be transferred from other PCs.

6. Transfer to SD

All images shown in thumbnails (17) will be transferred to the SD card inserted in the projector.
To cancel the transfer, click the "Cancel" button.
This function is not available during automatic display.

7. Stop

This suspends the automatic display currently performed.
Then the top image of in thumbnails (17) will be selected.

8. Presentation mode

During a presentation, choose this option to disable operation of sorting, adding
and deleting of images.
This mode will be cancelled when the order of images is changed.
In presentation mode, the personal computer uses the projector exclusively so
that images cannot be transferred from other PCs.

9. Previous image

This function selects the previous image in the thumbnails (17).
Selection of this function is ignored the top image is currently selected.

10.Next image

This function selects the next image in the thumbnails (17).
Selection of this function is ignored the last image is currently selected.

11.Re-display

The images in the folder that is selected in image folder setting (1) will be
displayed again in the thumbnail display area (17).
Thumbnails will be displayed in the same order as the previous one. The
registered new images such as the ones written into the folder with Explorer etc.
will be added to the last of thumbnails in turn.
This function is not available when the system is in automatic display mode.
Use this function when thumbnails are displayed in a wrong manner.

«
...
113
114
115
116
117
...
»

Содержание PT-L730NT








































































































































Отзывы:

Нет отзывов

Похожие инструкции для PT-L730NT

Бренд: Marantz Страницы: 66

Бренд: OPTRONIC Страницы: 10

Бренд: Starway Страницы: 17

Бренд: M-system Страницы: 4

Бренд: Optoma Страницы: 75

GAI-TRONICS 12576-120

Бренд: Hubbell Страницы: 2

Precision VS11856

Бренд: Precision Страницы: 60

Бренд: Canon Страницы: 9

Бренд: Canon Страницы: 8

Бренд: Canon Страницы: 2

Бренд: Canon Страницы: 4

Бренд: Canon Страницы: 36

SX50 - REALiS SXGA+ LCOS Projector

Бренд: Canon Страницы: 93

Бренд: Ask Proxima Страницы: 32

Presentation Solutions

Бренд: Panasonic Страницы: 2

PJLink PT-LB360

Бренд: Panasonic Страницы: 8

PJLink PT-LB330

Бренд: Panasonic Страницы: 8

Бренд: Panasonic Страницы: 6

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды