Panasonic PT-FW300U - LCD Proj Wxga 600:1 3500 Lumens Enet 13.7LBS H/v Lens, Руководство по эксплуатации

Страница: 38 / 72

E
NGLISH - 38
Settings
DISPLAY OPTION menu
J
INPUT GUIDE
When you change the input method, the guidance
appears in the upper right corner of the screen.
The following display methods are available. Press
I H
to cycle through the options.
J
OSD DESIGN
You can change the background color of the menu.
Press
I H
to select the required option.
J
WARNING MESSAGE
You can let display only the minimum warning
messages and hide others.
ON All of the warning messages will be
displayed.
OFF Only the minimum warning
messages will be displayed.
J
DVI EDID
You can switch the EDID setting and signal level
for variable
DVI signals.
EDID1 480p, 576p, 1 080/60i, 1 080/50i,
720/60p, 720/50p, 1 080/60p,
1 080/50p
EDID2(PC) VGA60, SVGA60, XGA60, XGA70,
XGA75, WXGA768/60, SXGA60,
, WXGA800/60
J
DVI SIGNAL LEVEL
0-255:PC (PC scale) For connecting to a
computer via
DVI-D IN terminal.
16-235 (TV scale) For connecting to AV
equipment via
DVI-D IN terminal,
such as DVI - HDMI connection.
If the input signal contains closed captions, you can turn
on the feature and switch the channels.
CLOSED CAPTION
OFF Deactive
ON Active
MODE
CC1 - 4 Change the channels CC1 - 4
J
SCREEN FORMAT
Select the required screen format by pressing
I H
.
16:10 When project on a 16:10 or 4:3
screen.
16:9 When project on a 16:9 screen.
ON-SCREEN DISPLAY
Options Function
DETAILED
Display the input method by graphic.
The
INPUT GUIDE will go out after
3 seconds without any operation.
If you select any
COMPUTER or DVI
terminal which has no signal, the
computer connection guidance will
be displayed. See “Computer
connection guidance” on page 54.
SIMPLE
Display the input method by text.
The
INPUT GUIDE will go out after
3 seconds without any operation.
OFF Turn off the guidance.
TYPE1 Semi transparent black
TYPE2 Solid blue
TYPE3 Semi transparent dark blue
NOTE:
• When the WARNING MESSAGE is set to OFF , use the
projector with utmost care due to the most of warning
messages will not be displayed.
Remote control Control panel
See “Navigating through the menu” on page 32.
See “Main menu and Sub-menu” on page 30.
DVI-D IN
NOTE:
• The DVI-D IN setting for the best quality depends on
the output equipment. Refer the instructions of the
connected equipment.
• DVI signal is very sensitive, and malfunction may occur
or other problems could be encountered with some DVI
equipment.
CLOSED CAPTION
SETTING
NOTE:
• VCR with TBC (Time Base Corrector) function is
recommended for video cassette tapes.
SCREEN SETTING