Panasonic PT-FW300U - LCD Proj Wxga 600:1 3500 Lumens Enet 13.7LBS H/v Lens, Руководство по эксплуатации

Страница: 19 / 72

Getting Started
E
NGLISH - 19
Connections
Read and follow the operating and connecting instructions of each peripheral device.
The peripheral devices must be turned off.
Use cables that match each peripheral device to be connected.
If the input signal is affected by signal jitter, the projected image may have poor image quality and timebase
correction is effective.
Confirm the type of video signals. See “List of compatible signals” on page 52.
J
LAN terminal
Before connection to the projector
Connecting example: Computers
NOTE:
• Use COMPUTER terminals to input YP
B
P
R
signals.
• When connecting to the COMPUTER terminals, you can switch the audio input terminal between COMPUTER AUDIO IN
and AUDIO IN . See “AUDIO SETTING” on page 42.
• When COMPUTER2 SELECT in the OPTION menu is set to OUTPUT , do not connect any input signals.
• See CD-ROM contents for the LAN network connection.
NOTE:
• Do not touch the metal parts of the LAN terminal. Failure to observe this may cause malfunction by static electricity.
Computers
Monitor
Computer for
controlling
Audio system
ACT lamp (Green)
Flashes when transmit data.
LINK lamp (Yellow)
Illuminates when a LAN cable (10 Base-T/100 Base-TX) is connected.