Panasonic PT-FW300U - LCD Proj Wxga 600:1 3500 Lumens Enet 13.7LBS H/v Lens, Руководство по эксплуатации

Страница: 17 / 72

Getting Started
Setting up
E
NGLISH - 17
If the projector is not positioned right in front of the center of the screen, you can adjust the projected image position
by moving the lens shift lever within the shift range of the lens.
J
Adjusting the lens shift lever
1. Open the front panel cover.
2. Screw the lens shift lever counterclockwise to unlock.
3. Move the lens shift lever to adjust the projected image
position.
4. Screw the lens shift lever clockwise to lock.
Q
Horizontal shift
You can place the projector where the projector lens is up
to 24% horizontally off-center from the screen and then adjust the image position with the lens shift lever.
Q
Vertical shift
You can place the projector where the projector lens is up to 50% vertically off-center from the screen and the
adjust the image position with the lens shift lever.
Lens shift and positioning
Shifting the lever right:
I
mage moves to the
right
Up to about 24 %
of the projection
Shifting the lever left:
Image moves to the
left
Up to about 24 %
of the projection
Up to about 50 %
of the projection
Up to about 50 %
of the projection
Shifting the lever down:
Image moves to the
bottom
Shifting the lever up:
Image moves to the top