manualshive.com logo in svg

Panasonic PT-DZ780, Руководство по эксплуатации, Страница: 108 / 196

Поделиться
Скачать
Panasonic PT-DZ780 Скачать руководство пользователя страница 108

Chapter 4

 

Settings — [DISPLAY OPTION] menu

108 - ENGLISH

Note

 

f

[UNIFORMITY] can be set for each [LAMP SELECT] setting.

 

f

The [UNIFORMITY] settings are not reset to the factory defaults even when [ALL USER DATA] is executed from the [PROJECTOR SETUP] 

menu 

→

 [INITIALIZE] (

x

 page 126).

[SHUTTER SETTING]

Enable/disable the shutter function automatically (shutter: closed/open) when the power is turned on.

Setting [STARTUP]

1)  Press 

as

 to select [SHUTTER SETTING].

2)  Press the <ENTER> button.

 

f

The 

[SHUTTER SETTING]

 screen is displayed.

3)  Press 

as

 to select [STARTUP].

4)  Press 

qw

 to switch the item.

[OPEN]

Starts projection with the shutter function disabled (shutter: open) when the power is turned on.

[CLOSE]

Starts projection with the shutter function enabled (shutter: closed) when the power is turned on.

Setting [SHUT-OFF]

1)  Press 

as

 to select [SHUTTER SETTING].

2)  Press the <ENTER> button.

 

f

The 

[SHUTTER SETTING]

 screen is displayed.

3)  Press 

as

 to select [SHUT-OFF].

4)  Press 

qw

 to switch the item.

[KEEP CURRENT STATE]

When the projector is switched off, the projector turns into standby with the shutter status left as is.

[OPEN]

When the projector is switched off, the projector turns into standby with the shutter left opened.

[CLOSE]

When the projector is switched off, the projector turns into standby with the shutter left closed.

[FREEZE]

Freeze the projected image temporarily regardless of the playback of the external device.

1)  Press 

as

 to select [FREEZE].

2)  Press the <ENTER> button.

 

f

Press the <MENU> button to release.

Note

 

f

[FREEZE] is displayed on the screen while freezing the image.

 

f

The image may momentarily disrupted before stopping when the image is stopped by operating [FREEZE] while the moving image is 

projecting.

[WAVEFORM MONITOR]

Use the input signals from a connected external device to display in a waveform. Check whether video output 

(luminance) signal level is within the recommended range for the projector and adjust.

1)  Press 

as

 to select [WAVEFORM MONITOR].

2)  Press 

qw

 to switch the item.

[OFF]

Does not display the waveform monitor.

[ON]

Displays the waveform monitor.

3)  Press the <MENU> button two times to clear.

Содержание PT-DZ780





































































































































































































Отзывы:

Нет отзывов