Panasonic PT-DZ780 Скачать руководство пользователя страница 107

Страница: 107 / 196

Chapter 4

Settings — [DISPLAY OPTION] menu

ENGLISH - 107

Note

To create/register the [USER LOGO] image, use “Logo Transfer Software” included in the supplied CD-ROM.

[STARTUP LOGO]

Set the logo display when the power is turned on.

1) Press

to select [STARTUP LOGO].

2) Press

to switch the item.

The items will switch each time you press the button.

[DEFAULT LOGO]

Displays the Panasonic logo.

[USER LOGO]

Displays the image registered by the user.

[NONE]

Disables the startup logo display.

Note

The startup logo will disappear in approximately 15 seconds.

To create/register the [USER LOGO] image, use “Logo Transfer Software” included in the supplied CD-ROM.

[UNIFORMITY]

Correct the brightness and color unevenness of the entire screen.

Adjusting by each color

1) Press

to select [UNIFORMITY].

2) Press the <ENTER> button.

The

[UNIFORMITY]

screen is displayed.

3) Press

to select [VERTICAL] or [HORIZONTAL].

4) Press

to adjust the level.

Item

Operation

Adjustment

Range of adjustment

[VERTICAL]

Press

The lower-side color becomes

pale, or the upper-side color

becomes dark.

-127 - 127

Press

The upper-side color becomes

pale, or the lower-side color

becomes dark.

[HORIZONTAL]

Press

The left-side color becomes pale,

or the right-side color becomes

dark.

Press

The right-side color becomes

pale, or the left-side color

becomes dark.

Setting [PC CORRECTION]

To use the [PC CORRECTION] function, the optional Upgrade Kit (Model No.: ET-UK20) is required. To purchase

the product, consult your dealer.

1) Press

to select [UNIFORMITY].

2) Press the <ENTER> button.

The

[UNIFORMITY]

screen is displayed.

3) Press

to select [PC CORRECTION].

4) Press

to switch the item.

[OFF]

Does not perform correction using computer.

[ON]

Performs correction for the brightness and color unevenness of the entire screen using computer.

Advanced skills are necessary to use computer control correction. Consult your dealer.

Содержание PT-DZ780





































































































































































































Результаты поиска

Содержание PT-DZ780

Отзывы:

Panasonic PT-DZ780, Руководство по эксплуатации, Страница: 107 / 196

Результаты поиска

Содержание PT-DZ780

Отзывы: