Panasonic PT-DW830U Скачать руководство пользователя

Страница: 131 / 190

Chapter 4

Settings — [SECURITY] menu

ENGLISH - 131

[DISPLAY SETTING]

Overlap the security message (text or image) over the projecting image.

1) Press

to select [DISPLAY SETTING].

2) Press

to switch the item.

The items will switch each time you press the button.

[OFF]

The text display is disabled.

[TEXT]

The text display is enabled.

[USER LOGO]

Displays the image registered by the user.

Note

To create/register the [USER LOGO] image, use “Logo Transfer Software” included in the supplied CD-ROM.

[TEXT CHANGE]

Change the text displayed when the text display is enabled by selecting [TEXT] in [DISPLAY SETTING].

1) Press

to select [TEXT CHANGE].

2) Press the <ENTER> button.

The

[TEXT CHANGE]

screen is displayed.

3) Press

asqw

to select the text, and press the <ENTER> button to enter the text.

4) Press

asqw

to select [OK], and press the <ENTER> button.

The text is changed.

[CONTROL DEVICE SETUP]

Enable/disable the button operations on the control panel and the remote control.

1) Press

to select [CONTROL DEVICE SETUP].

2) Press the <ENTER> button.

The

[CONTROL DEVICE SETUP]

screen is displayed.

3) Press

to select [CONTROL PANEL] or [REMOTE CONTROL].

[CONTROL PANEL]

You can set the limitation on the control from the control panel.

[REMOTE CONTROL]

You can set the limitation on the control from the remote control.

4) Press the <ENTER> button.

The

[CONTROL PANEL]

screen or the

[REMOTE CONTROL]

screen is displayed.

5) Press

to select [CONTROL PANEL] or [REMOTE CONTROL].

6) Press

to switch the item.

You can set the operation restriction from the control panel or the remote control.

[ENABLE]

Enables all button operations.

[DISABLE]

Disables all button operations.

[USER]

Operation of all buttons can be enabled/disabled separately.

Refer to “Enabling/disabling any button” (

page 131) for details.

7) Press

to select [APPLY], and press the <ENTER> button.

The confirmation screen is displayed.

8) Press

to select [OK], and press the <ENTER> button.

Enabling/disabling any button

1) Press

to select [CONTROL DEVICE SETUP].

Содержание PT-DW830U































































































































































































Результаты поиска

Содержание PT-DW830U

Отзывы:

Похожие инструкции для PT-DW830U

Бренды по названию

Популярные бренды

Panasonic PT-DW830U, Руководство по эксплуатации

Результаты поиска

Содержание PT-DW830U

Отзывы:

Похожие инструкции для PT-DW830U

Бренды по названию

Популярные бренды