Panasonic PT-DW830U Скачать руководство пользователя

Страница: 127 / 190

Chapter 4

Settings — [SIGNAL LIST] menu

ENGLISH - 127

[SIGNAL LIST] menu

On the menu screen, select [SIGNAL LIST] from the main menu.

Refer to “Navigating through the menu” (

page 65) for the operation of the menu screen.

Registered signal details

A1 (1-2)

When the address number (A1, A2, ... L7, L8) signal is registered

Sub memory number

Memory number:

A name can be set for each sub memory (

page 129).

Registering new signals

After a new signal is input and the <MENU> button on the remote control or the control panel is pressed, the registration is completed and the

[MAIN MENU]

screen is displayed.

Note

Up to 96 signals, including sub memories, can be registered to the projector.

There are 12 pages (eight memories of A through L, with eight memories possible on each page) for memory numbers, and the signal is

registered to the lowest number that is available. If there is no available memory number it will be overwritten from the oldest signal.

The names to be registered are automatically determined by the input signals and memory numbers.

If a menu is being displayed, the new signals will be registered at the instant they are input.

Renaming the registered signal

Registered signals can be renamed.

1) Press

asqw

to select the signal of which name is to be changed.

2) Press the <ENTER> button.

The

[REGISTERED SIGNAL STATUS]

screen is displayed.

The memory number, input terminal, input signal name, frequency, synch polarity, etc., are displayed.

Press the <MENU> button to return to the

[SIGNAL LIST]

screen.

3) Press the <ENTER> button.

The

[REGISTERED SIGNAL SETUP]

screen is displayed.

4) Press

to select [SIGNAL NAME CHANGE].

5) Press the <ENTER> button.

The

[SIGNAL NAME CHANGE]

screen is displayed.

6) Press

asqw

to select the text, and press the <ENTER> button to enter the text.

7) After the name is changed, press

asqw

to select [OK], and press the <ENTER> button.

The registration is completed and the

[REGISTERED SIGNAL SETUP]

screen returns.

When pressing

asqw

to select [CANCEL] and pressing the <ENTER> button, the changed signal name will not be registered and

an automatically registered signal name will be used.

Deleting the registered signal

Registered signals can be deleted.

1) Press

asqw

to select the signal to delete.

Содержание PT-DW830U































































































































































































Результаты поиска

Содержание PT-DW830U

Отзывы:

Похожие инструкции для PT-DW830U

Бренды по названию

Популярные бренды

Panasonic PT-DW830U, Руководство по эксплуатации

Результаты поиска

Содержание PT-DW830U

Отзывы:

Похожие инструкции для PT-DW830U

Бренды по названию

Популярные бренды