ADVANCED MENU
E
NGLISH - 23
Settings
(Not available for PT-D5000)
The built-in edge blending feature allows multiple projector
images to be seamlessly overlapped by adding a brightness
ramp. Press
F
G
to select the required option.
Q
Adjusting EDGE BLENDING
1. Select
ON
and press the
ENTER
button to display the
detailed options.
2. Switch between
ON
/
OFF
of the required connecting
edge.
3. Press
I
H
to adjust the value of
START
and
WIDTH
.
WIDTH
of the both projectors must be the same value.
Q
Adjusting with colour markers
You can adjust with colour markers, which indicate the
overlapping area.
1. Press
G
several times until
MARKER
is displayed.
2. Select
MARKER
and press
I
H
to switch between
ON
/
OFF
.
Green and red lines will be displayed.
Green line indicates
START
point, and red line indicates
WIDTH
from
START
point.
Adjust
START
and
WIDTH
for superimposing the green line
to the red.
Q
Selecting gamma level
You can adjust gamma level of the lapping area for fine
adjustment.
1. Select
GAMMA
and press the
ENTER
button.
2. Press
I
H
to cycle through the options.
Options are 2.2, 1.8 and 2.0.
3. Press the
ENTER
button to apply the setting.
EDGE BLENDING
OFF
Deactive
ON
Adds a brightness ramp to the
overlapped area and adjustable the
overlapping position manually.
Vertical connecting
Horizontal connecting
Overlapped
Projector 1
LOWER
:
ON
Projector 2
UPPER
:
ON
Overlapped
Projector 1
RIGHT
:
ON
Projector 2
LEFT
:
ON
Projector 1
Projector 2
Overlapping area
Green lines
Red lines
Содержание PT-D5000ELS
Страница 52: ...Printed in Japan P0209 5069F...